We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
RAM Mounts modular hardwire charger with USB-A port, black finish

RAM Mounts

RAM Mounts Modular 20-60V Hardwire Charger USB-A 5V 2.5A

SKU CH-EEF2-G2M7X

A modular hardwire charger accepting 20-60 V DC input and delivering 5 V at 2.5 A via USB-A for GDS vehicle mounts

  • Hardwires directly to 20-60 V DC vehicle power
  • Delivers 5 V 2.5 A USB-A output for phones
  • Quick-disconnect plug lets you swap chargers without rewiring
  • Works with any 5 V device drawing 2.5 A or less
  • Modular GDS design fits existing RAM vehicle mounts

Power Input Range

The charger accepts a direct-current input between 20 V and 60 V, making it suitable for a variety of vehicle electrical systems. It delivers a regulated 5 V output at up to 2.50 A through a female USB Type-A port. The modular design uses a quick-disconnect connector so the charging component can be swapped without rewiring the vehicle harness. It is intended for any 5 V device that draws 2.5 A or less.

Vehicle Compatibility Check

Confirm that the vehicle supply voltage falls within the 20 V to 60 V DC range before installation. Verify that the device you plan to charge operates at 5 V and requires no more than 2.5 A of current. Ensure a suitable fused circuit is available for the hardwire connection. The quick-disconnect fitting must be accessible for future charger upgrades.

Ideal Use Cases

This unit suits fleet installers and vehicle owners who want a permanent, serviceable USB charging point for phones, tablets or GPS units. It is not for buyers who need USB-C Power Delivery or higher output currents for laptops. It is also unsuitable for systems that operate outside the stated input voltage window or that require an AC mains supply.

Highlights

  • Hardwires directly to 20-60 V DC vehicle power
  • Delivers 5 V 2.5 A USB-A output for phones
  • Quick-disconnect plug lets you swap chargers without rewiring
  • Works with any 5 V device drawing 2.5 A or less
  • Modular GDS design fits existing RAM vehicle mounts

Specifications

No published specifications for this item yet.

Questions about this item

Does the hardwire charger come with a USB cable or do I need to supply my own?

The charger has a female USB Type A connector so you can plug in any standard USB-A cable; no cable is included in the box.

Is there a choice of output currents or voltages for this charger?

The unit provides a fixed 5 V DC output at 2.5 A and accepts a 20-60 V DC input range; no alternative output versions are offered.

Will the 2.5 A output charge my phone at full speed while it is mounted?

The charger delivers up to 2.5 A at 5 V, so any 5 V device drawing 2.5 A or less will charge at its maximum supported rate.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.