We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten black button emitters on a hang tag, barbed ends for quarter or half inch tubing

RAINBIRD

RAINBIRD SW10-10PK 1.0 GPH Drip Irrigation Emitter 10 Pack

SKU CH-R8X6-4VXCF MPN SW10-10PK

Ten emitters deliver 1.0 GPH each for spot watering widely spaced plants using 1/4 In. or 1/2 In. tubing at up to 40 psi

  • TypeEmitters
  • FeaturesLandscape dripline system spot watering emitter Best for loa
  • Delivers precise 1.0 GPH flow to each plant
  • Pack of 10 emitters covers multiple watering zones
  • Large water passages reduce clogging in loamy soil
  • Barbed ends fit both 1/4 In. and 1/2 In. tubing
  • Operates reliably at up to 40 psi pressure

1.0 GPH spot watering emitters for drip irrigation

This ten-pack of Rain Bird button drippers delivers a controlled flow of 1.0 gallon per hour. They are designed for spot watering widely spaced plants or trees in a landscape dripline system. The emitters suit loamy soils and work with low-flow drip irrigation layouts.

Simple push-fit barbed connections

Each emitter has barbed ends that accept 1/4 in. and 1/2 in. drip tubing for tool-free installation. Large water passages reduce the chance of clogging during normal use. Because they are non-pressure compensating, flow will vary if supply pressure changes across the line.

Check tubing size and operating pressure

Confirm your existing drip lines are either 1/4 in. or 1/2 in. diameter so the barbs seat correctly. Verify the system runs at or below 40 psi to stay within the emitter's pressure rating. These units are not pressure compensating, so they are unsuitable for installations that require equal flow on sloped or long runs.

Highlights

  • Delivers precise 1.0 GPH flow to each plant
  • Pack of 10 emitters covers multiple watering zones
  • Large water passages reduce clogging in loamy soil
  • Barbed ends fit both 1/4 In. and 1/2 In. tubing
  • Operates reliably at up to 40 psi pressure

Specifications

BrandRain Bird
ModelSW10-10PK
TypeEmitters
FeaturesLandscape dripline system spot watering emitter
Best for loamy soils
Provides controlled flow of 1-gallon per hour
Ideal for extending irrigation to widely spaced plants or trees
Increases flow to selected plants as needed anywhere in your landscaping
Shipping weight0.45 kg
Package size310 × 193 × 124 mm

Questions about this item

How can I confirm the 1.0 GPH emitter is delivering the correct flow after installation?

Run the system at operating pressure and time how long it takes to fill a one-gallon container at the emitter outlet; it should take roughly one hour.

What comes in the 10-pack and is any extra tubing or fittings required?

The pack contains ten black button-dripper emitters with barbed ends for 1/4 In. or 1/2 In. tubing; tubing, stakes and a punch tool are sold separately.

When should I choose the 1.0 GPH version instead of a different flow rate?

Select the 1.0 GPH emitter for loamy soils and widely spaced plants or trees that need a slow, controlled application matching the 40 psi pressure rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.