Radnor
Radnor 64003037 Flow Gauge Regulator Argon CO2 Single Stage
Single-stage flow gauge regulator for argon and carbon dioxide cylinders with a 30 scfh maximum flow rate
- MaterialHAWA
- TypeWelding Supplies
- Single-stage design simplifies gas control
- Argon and CO₂ compatible for versatile welding
- 30 scfh max flow suits light-duty tasks
- 3 000 psig inlet handles high-pressure cylinders
- Female NGO and UNF connections fit standard fittings
Gas compatibility
This Radnor flow gauge regulator handles argon and carbon dioxide for welding applications. It mounts directly to a cylinder with a single stage design that reduces inlet pressure in one step. The unit carries California Proposition 65 warnings for chemicals linked to cancer and reproductive harm.
Pressure and flow limits
Maximum inlet pressure is rated at 3,000 psig with a right hand NGO thread on a 0.965 in. -14 female inlet. Both argon and carbon dioxide deliver a maximum flow rate of 30 scfh through a 5/8 in. -18 UNF female outlet. Single stage construction means outlet pressure can vary as cylinder pressure drops.
Cylinder mounting requirements
The regulator connects to a cylinder using the specified NGO inlet thread and requires no additional manifold or adapter for the listed gases. It frees the welder from needing a separate flow meter because the gauge integrates flow indication. Buyers who need multi stage regulation or compatibility with other gas types should look elsewhere.
Highlights
- Single-stage design simplifies gas control
- Argon and CO₂ compatible for versatile welding
- 30 scfh max flow suits light-duty tasks
- 3 000 psig inlet handles high-pressure cylinders
- Female NGO and UNF connections fit standard fittings
Specifications
| Brand | RADNOR |
|---|---|
| Material | HAWA |
| Type | Welding Supplies |
Questions about this item
How do I fit the 0.965-14 NGO inlet to my gas cylinder?
Thread the female NGO nut onto the cylinder valve by hand, then tighten with a wrench on the flats; do not overtighten the right-hand threads or the seat can distort.
Which part will need replacement after extended use?
The internal seat and diaphragm assembly should be inspected annually and replaced if leakage or erratic flow appears.
At what inlet pressure does the single-stage design stop holding a steady 30 scfh?
As cylinder pressure falls the outlet flow will rise above the 30 scfh setting because a single-stage regulator cannot compensate for the decaying inlet pressure.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
