Qyouth
Qyouth HDMI 2.0 Matrix 6x2 Switch Splitter 6 in 2 Out watch accessory
Routes six HDMI sources to two displays with independent audio extraction and 4K 60 Hz support
- Size/DimensionsSeries 1
- TypeScreen Protector
- Material2023-07-05 11-05-06--265
- Routes six HDMI sources to two independent displays
- Extracts audio to optical SPDIF and 3.5 mm jack simultaneously
- Handles 4K 60 Hz 4:4:4 video with HDR support
- Downscales 4K input to 2K output for mixed displays
- Extends 1080p signals up to 15 metres over standard cable
HDMI 2.0 Matrix 6x2 Switch
This HDMI 2.0 matrix routes signals from six source devices to two displays. Each output can show the same image or a different one. It supports video up to 4K at 60 Hz with RGB or YUV 4:4:4 colour sampling. Independent audio extraction is available through SPDIF optical and 3.5 mm jacks on both outputs.
Simple Rack or Desk Installation
Connect up to six HDMI sources and two displays using standard cables. The unit includes an IR remote for switching without front-panel access. Input cables up to 15 metres are supported at 4K 30 Hz, while 4K 60 Hz requires cables of five metres or less. EDID management is handled automatically for most sources.
Installers Needing Multi-Source Distribution
Ideal for conference rooms, digital signage, and training setups that share several sources across two screens. Buyers who require more than two simultaneous display zones should consider a larger matrix. Users without HDMI sources or who need wireless presentation will not be served by this device.
Highlights
- Routes six HDMI sources to two independent displays
- Extracts audio to optical SPDIF and 3.5 mm jack simultaneously
- Handles 4K 60 Hz 4:4:4 video with HDR support
- Downscales 4K input to 2K output for mixed displays
- Extends 1080p signals up to 15 metres over standard cable
Specifications
| Size/Dimensions | Series 1 |
|---|---|
| Type | Screen Protector |
| Material | 2023-07-05 11-05-06--265 |
Questions about this item
How can I confirm the 6x2 matrix is routing each of the six HDMI sources to the two displays at 4K 60 Hz RGB 4:4:4?
Check that both displays show the correct source at 3840x2160/60Hz, verify the front-panel LEDs match the selected inputs, and confirm audio is heard through the SPDIF optical or 3.5 mm jack on each output independently.
Which cables and accessories are included with the switcher and what must I provide separately?
The unit ships with an IR remote controller; you must supply six HDMI input cables (AWG26 standard, up to 5 m for 4K 60 Hz) and two HDMI output cables (up to 15 m for 4K 30 Hz) plus any SPDIF optical or 3.5 mm audio cables you need.
When should I choose the 4K 60 Hz 5 m input limit versus the 4K 30 Hz 15 m limit for my installation?
Use 4K 60 Hz sources with cables no longer than 5 metres; if your cable runs must reach 15 metres, set the source to 4K 30 Hz or 1080p to maintain a stable signal.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Qyouth HEXIN RS232 To RS485 Serial Port Data Interface Adapter Converter 1.2KM 3 Bit watch accessory
- Series 1
- Screen Protector
Qyouth Watch Accessory Series 1 Screen Protector 54cm 24-Pin ATX PSU Tester ON/OFF Switch
- Series 1
- Screen Protector
Qyouth 24 Hours Parking Monitoring 5V 3A USB Car Charge OBD Hardwire Kit watch accessory
- Series 1
- Screen Protector



