We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black three-prong C5 to NEMA 5-15P power cord, 1.8 m, PVC jacket

QYD C5 to NEMA 5-15P Power Cord 1.8m 18AWG 125V 10A UL Listed

SKU CH-3V4B-XSMGD

An 18AWG C5 to NEMA 5-15P power cord rated 125V 10A, UL listed and 1.8m long for laptops, monitors and Epson printers

  • Length6 Feet
  • Connector DetailC5
  • SpecificationsVoltage: 125 volts; Current: 10 amps; Connector: C5; UL List
  • Fits Epson WorkForce WF-2830, WF-7840 and many other models
  • 8 metre length gives flexible placement on desk or floor
  • 18 AWG copper conductors rated for 125 V at 10 A
  • UL Listed safety certification confirms compliance with recognised standards
  • C5 'Mickey Mouse' connector mates securely with standard NEMA 5-15P wall plug

QYD C5 to NEMA 5-15P Power Cord

This 1.8 metre QYD cable connects a standard NEMA 5-15P wall plug to an IEC-60320 C5 inlet, often called a Mickey Mouse connector. It is rated for 125 volts at 10 amps using 18AWG copper wire inside a flame-retardant PVC jacket. The fully moulded design passes over 10000 bend tests and carries UL Listing for safety compliance. It suits owners of compatible laptops, monitors, printers or scanners needing a replacement or spare lead.

Suits C5-equipped devices only

The cord fits equipment that uses a three-pin C5 inlet, such as many Epson WorkForce and EcoTank models including the 2830, 2850, 2860, 2950, 2960, 3720, 3730, 3733, 4700, 4720, 4730, 4734, 4740, 4747, 4750, 4760, 4800, 4830, 7710, 7720, 7820 and 7840. Buyers whose gear uses a different inlet type cannot use this cable. It is not a substitute for cords with other connector shapes or higher current ratings.

18AWG gauge sets the current limit

The 18AWG (0.75 mm²) copper conductors determine the 10 amp maximum at 125 volts, which is the single specification that decides whether this cord can power a given device safely. Equipment drawing more than 10 amps at 125 volts requires a heavier-gauge cable. Check the device label before purchase to confirm the current draw is within this limit.

Highlights

  • Fits Epson WorkForce WF-2830, WF-7840 and many other models
  • 8 metre length gives flexible placement on desk or floor
  • 18 AWG copper conductors rated for 125 V at 10 A
  • UL Listed safety certification confirms compliance with recognised standards
  • C5 'Mickey Mouse' connector mates securely with standard NEMA 5-15P wall plug

Specifications

BrandQYD
Length6 Feet
Connector DetailC5
SpecificationsVoltage: 125 volts; Current: 10 amps; Connector: C5; UL Listed: true

Questions about this item

What does the 10 A rating mean once the cord is plugged into my printer?

It means the cord can safely carry up to 10 A at 125 V, matching the maximum draw of the listed Epson WorkForce and EcoTank models.

What does the C5 to NEMA 5-15P connection cap in practice?

The IEC-60320 C5 “Mickey Mouse” end fits the device inlet, while the NEMA 5-15P plug goes into a standard North American 125 V wall outlet.

What clearance does the 1.8 m length and moulded plugs need to fit behind a desk?

The cord is 1.8 m (5.9 ft) long with fully moulded C5 and NEMA 5-15P ends, so allow a few centimetres behind the equipment for the strain reliefs.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.