QAREQU
QAREQU Dual Band RP-SMA Antenna 2-Pack 6dBi 200mm Black
Two dual-band RP-SMA antennas with 6 dBi gain covering 2.4–5.8 GHz for routers, adapters or cameras
- ColorBlack
- Dual-band coverage from 2.4 to 5.8 GHz for broad device compatibility
- 6 dBi gain focuses signal strength for longer range
- Omni-directional radiation pattern distributes coverage evenly around the antenna
- RP-SMA male connector with inner-hole design fits common routers and adapters
- Compact 200 mm length and 18.4 g weight allow easy positioning
Dual-Band RP-SMA Antennas
This pair of QAREQU antennas covers the 2.4 GHz and 5.8 GHz bands with 6 dBi gain. Each unit measures 200 mm and uses an RP-SMA male connector with a centre hole. They are designed to replace broken aerials or to improve the wireless reach of compatible adapters, routers, motherboards and cameras.
Who Benefits and Who Does Not
Builders upgrading a desktop Wi-Fi card, a router or a wireless camera that accepts RP-SMA will gain extra range. Buyers whose equipment uses SMA, U.FL or any other connector type cannot attach these units. Anyone needing directional focus or a higher gain figure should look at alternative designs.
Compatibility Checklist
Verify that the host device has an RP-SMA female jack before ordering. Confirm the operating band falls within the 2400 MHz to 5800 MHz range. Ensure there is physical clearance for a 200 mm whip. The pack contains two antennas and no mounting hardware or cables.
Highlights
- Dual-band coverage from 2.4 to 5.8 GHz for broad device compatibility
- 6 dBi gain focuses signal strength for longer range
- Omni-directional radiation pattern distributes coverage evenly around the antenna
- RP-SMA male connector with inner-hole design fits common routers and adapters
- Compact 200 mm length and 18.4 g weight allow easy positioning
Specifications
| Color | Black |
|---|
Questions about this item
Will these antennas fit the RP-SMA female connectors on my Wi-Fi router or wireless adapter?
Yes, each antenna has an RP-SMA male connector with a centre hole that mates with standard RP-SMA female ports found on routers, PCIe cards and USB adapters.
Can I keep my existing single-band 2.4 GHz equipment and still benefit from the 6 dBi gain?
The antennas cover 2400–5800 MHz, so they work on 2.4 GHz and 5 GHz bands simultaneously; older 2.4 GHz-only gear will still see the 6 dBi boost.
How can I confirm the 6 dBi improvement after installing the two 200 mm antennas?
Compare signal strength (RSSI) or throughput in your router or adapter utility before and after fitting the antennas; a noticeable rise indicates the gain is active.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



