QAREQU
QAREQU Dual Band 6dBi WiFi Antenna Kit Magnetic Stand RP-SMA 110cm Cable
Dual-band 6 dBi omnidirectional antenna kit with magnetic stand and 110 cm RP-SMA cables extends Wi-Fi range for routers or adapters
- ColorBlack
- Class6 dBi
- Dual-band 2.4 / 5.8 GHz coverage extends router reach
- 6 dBi omnidirectional gain strengthens weak signal areas
- Magnetic stand secures both antennas on metal surfaces
- 110 cm cables allow flexible antenna placement
- RP-SMA connectors fit common routers and network cards
Dual Band 6dBi Antenna Kit
This dual band antenna kit operates at 2.4GHz and 5.8GHz with 6dBi omnidirectional gain. It includes two antennas and a magnetic stand connected by 110cm RP-SMA cables. The kit is designed to extend wireless range for routers, network cards or desktop computers by adding external antennas. It does not generate a wireless signal itself.
Check RP-SMA Compatibility
Verify that your router, network card or hotspot uses RP-SMA female connectors with an inner pin for the antenna side. The stand base provides RP-SMA female ports while the antenna cables terminate in RP-SMA male plugs with an inner hole. Ensure the device has two available antenna ports if you plan to use both antennas. The magnetic base requires a ferrous surface for secure mounting.
Thermals Noise Power
Passive antenna components produce no heat, noise or power draw during operation. The 200mm antennas and 46g stand add negligible thermal load to the host device. Magnetic base attachment avoids adhesive residue and allows repositioning without tools. Cable routing over 110cm length should avoid sharp bends to maintain signal integrity at 50 ohm impedance.
Highlights
- Dual-band 2.4 / 5.8 GHz coverage extends router reach
- 6 dBi omnidirectional gain strengthens weak signal areas
- Magnetic stand secures both antennas on metal surfaces
- 110 cm cables allow flexible antenna placement
- RP-SMA connectors fit common routers and network cards
Specifications
| Color | Black |
|---|---|
| Class | 6 dBi |
Questions about this item
What comes in the kit and what else is needed to use it?
The kit includes one magnetic stand, two 6 dBi antennas and 110 cm RP-SMA cables. You must supply a router, network card or hotspot with RP-SMA female ports; the antennas do not generate a signal themselves.
The kit lists 2.4 GHz and 5.8 GHz — which band should I pick?
Both antennas cover 2400–5800 MHz simultaneously, so a single kit works for 2.4 GHz and 5.8 GHz bands without choosing between them.
What does the 6 dBi gain actually do for my router?
The 6 dBi omnidirectional antennas focus signal horizontally, extending range on the same floor while reducing coverage directly above and below the magnetic stand.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
