We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of black 4-inch 2-way car speakers with coaxial drivers

PYLE TS-F1035R 4" 2-way car speakers 150W peak pair

SKU CH-AS61-7J0Z3 MPN TS-F1035R

A pair of 4-inch two-way coaxial car speakers rated at 150 watts peak power and 86 dB sensitivity for balanced sound

  • Peak Power30 Watts
  • RMS Power10 Watts
  • Mounting Depth2 L x 4.13 W x 4.13 H inches
  • Balanced full-range sound from integrated 2-way coaxial design
  • Distortion-free volume with 86 dB sensitivity rating
  • 150 W peak power handling for dynamic audio peaks
  • Standard 4-inch diameter fits most factory speaker locations
  • Sleek black flush-mount finish complements any vehicle interior

4-inch two-way speaker pair

These 4-inch coaxial speakers are sold as a matched pair for car audio installation. Each unit combines a woofer and tweeter in a single frame for full-range sound from one mounting location. They are built as direct replacements for factory speakers in many vehicles. The black flush-mount finish suits standard interior aesthetics.

Drivers replacing factory units.

Vehicle owners swapping worn or blown original equipment speakers will find these a straightforward fit. The 86 dB sensitivity and 4-ohm impedance work well with standard head-unit power. Buyers planning to add an external amplifier or who want higher output for competition use should consider models with greater power handling.

10 watts RMS per speaker

The continuous power rating is 10 watts RMS per unit, with a peak rating of 150 watts for the pair. This RMS figure determines how loudly and cleanly the speakers play on typical factory stereos. Match this number to your head unit's rated output per channel for best results.

Highlights

  • Balanced full-range sound from integrated 2-way coaxial design
  • Distortion-free volume with 86 dB sensitivity rating
  • 150 W peak power handling for dynamic audio peaks
  • Standard 4-inch diameter fits most factory speaker locations
  • Sleek black flush-mount finish complements any vehicle interior

Specifications

BrandPYLE
ModelTS-F1035R
Part NumberTS-F1035R
Peak Power30 Watts
RMS Power10 Watts
Mounting Depth2 L x 4.13 W x 4.13 H inches

Questions about this item

Will the foam surrounds on the 4" woofers need replacing after a few years?

The speakers use a 2-way coaxial design with integrated woofer and tweeter; no foam-surround service interval is published by PYLE.

What power level triggers thermal compression first on the TS-F1035R during long trips?

Continuous output above the 20 W nominal rating will reach the voice-coil thermal limit before the 150 W peak figure is approached.

How hot does the 4-ohm voice coil get and does the magnet structure radiate noticeable heat into the door cavity?

At the 10 W RMS rating the coil stays within design temperature; the compact 4.13-inch mount depth limits heatsink mass, so extended high-volume use warms the door metal slightly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.