We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black box with RCA jacks and 12V power input

Pyle

Pyle PP999 Phono Preamp Turntable

SKU CH-QR8Z-CPX7H

A compact phono preamp that converts turntable signals to line level with low-noise operation and stereo RCA connections

  • Converts phono signals to line level for modern equipment
  • Low-noise operation at 70 dB signal-to-noise ratio
  • Stereo RCA input and output for simple plug-and-play
  • Compact size of 3.54 x 2.13 x 1.02 inches fits tight spaces
  • Powered by included 12-volt DC adapter from 110-volt mains

Mini Phono Preamp for Turntables

The Pyle PP999 is a compact phono preamplifier that converts a turntable's phono-level signal to a standard line-level output. It is built for listeners who want to connect a magnetic-cartridge turntable to an amplifier, receiver, computer or powered speakers that lack a dedicated phono input.

Replaces a Missing Phono Stage

This unit upgrades a system that has no phono input or suffers from a noisy built-in stage. The jump is worth it when your amplifier or audio interface only offers line-level RCA jacks and you need 3 mV input sensitivity at 50K Ohms with a 2 V maximum output at 10K Ohms.

Check Your Cartridge and Power Source

Verify that your turntable uses a moving-magnet cartridge compatible with 3 mV / 50K Ohms loading. Ensure you have a free mains outlet for the included 12 V DC adapter and a short RCA cable run to keep the signal path within the 70 dB signal-to-noise ratio spec.

Highlights

  • Converts phono signals to line level for modern equipment
  • Low-noise operation at 70 dB signal-to-noise ratio
  • Stereo RCA input and output for simple plug-and-play
  • Compact size of 3.54 x 2.13 x 1.02 inches fits tight spaces
  • Powered by included 12-volt DC adapter from 110-volt mains

Specifications

No published specifications for this item yet.

Questions about this item

How much clearance is needed for the 3.54 x 2.13 x 1.02 inch chassis?

The unit measures 3.54 inches wide, 2.13 inches high and 1.02 inches deep, so allow at least that footprint plus cable space behind the RCA jacks.

Which RCA jack is input and which is output, and where does the ground wire go?

Connect the turntable cables to the RCA inputs and attach its ground wire to the grounding post; then run cables from the RCA outputs to your amplifier or receiver.

When should the 12 Volt DC adapter be replaced?

Replace the 12 Volt DC adapter if the preamp no longer powers on, the LED fails to light, or you hear hum that disappears with a known-good 12 Volt supply.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.