ZYX Music
ZYX Music Double DIN Dash Kit Wire Harness Antenna Adapter 2011-2013 Kia Sorento
$59.99
0.00069838BTC
In stock
Pyle
Pyle PLUTV40BK 4 inch 900W car speakers
A pair of 4-inch two-way marine-grade speakers rated for 900 W peak power with IP-X5 waterproof housing and universal roll-bar mounts
- TypeSpeaker
- Speaker Size0.5"
- Vehicle TypeATV, UTV, 4x4, Jeeps, Marine Watercraft
- ColorBlack
- Woofer MaterialWoofer Material:
- Surround MaterialButyl Rubber Surround
- 900 W peak power for loud off-road audio
- 450 W RMS at 4 Ω delivers sustained output
- IP-X5 waterproof rating withstands water jets
- Universal roll-bar brackets fit 1.5–2.0 in tubing
- 90 dB sensitivity produces high volume with less power
Passive 4-inch marine speakers
The Pyle PLUTV40BK is a pair of passive two-way speakers built for off-road and marine use. Each unit houses a 4-inch polypropylene cone with a butyl rubber surround and a 0.5-inch neodymium dome tweeter. A 30 oz circuit magnet and 1.0-inch KSV voice coil handle 450W RMS at 4 ohms. The IP-X5 rated cabinets mount on roll bars from 1.5 to 2.0 inches in diameter.
Open-air riders needing rugged sound
These speakers suit ATV, UTV, Jeep and boat owners who want loud, weather-resistant audio without a dedicated marine amplifier. The universal brackets and included rubber pads simplify roll-cage installation. Buyers who need an all-in-one powered system or indoor home-theatre performance should look elsewhere.
450W RMS power handling
The continuous 450W RMS rating at 4 ohms determines whether your amplifier can drive the pair cleanly. Match or slightly exceed this figure to avoid clipping or thermal damage. Peak power is listed at 900W but should not be used for amplifier sizing.
Highlights
- 900 W peak power for loud off-road audio
- 450 W RMS at 4 Ω delivers sustained output
- IP-X5 waterproof rating withstands water jets
- Universal roll-bar brackets fit 1.5–2.0 in tubing
- 90 dB sensitivity produces high volume with less power
Specifications
| Brand | Pyle |
|---|---|
| Type | Speaker |
| Speaker Size | 0.5" |
| Model | PLUTV40BK |
| Vehicle Type | ATV, UTV, 4x4, Jeeps, Marine Watercraft |
| Color | Black |
| Woofer Material | Woofer Material: |
| Surround Material | Butyl Rubber Surround |
| Tweeter | Neodymium Dome (x2) |
| Voice Coil | 1.0” KSV (Kapton Voice Coil) |
| Magnet Construction | 30 oz. Circuit Magnet |
| Frame Construction | Rugged, Machine Molded Speaker Cabinet |
| Part Number | PLUTV40BK |
| Peak Power | 900W MAX |
| RMS Power | 450W (at 4 Ohm) |
| Sensitivity | 90 dB +/- 2 dB @ 1M/1W |
| Frequency Response | 105Hz - 20kHz |
| Impedance | 4 Ohm |
| Mounting Depth | 7.4” |
| Package Contain | (2) 4” Off-Road Speakers (6) Rubber Pads (4.53" x 1.18" x 0.12" inches) |
| Features | Waterproof rated (IP-X5) Compact 2-way stereo system Universal Mounting Bracket Full-range sound with impressive bass Quick nickel-plated push-in terminal Durable, rugged housing designed for extreme outdoor conditions Ideal for off-road vehicles, ATVs, marine craft |
Questions about this item
What amplifier power is needed to drive the 900W peak, 450W RMS speakers?
An amplifier rated around 450W RMS at 4 ohms per channel will match the speakers' continuous power handling and 900W peak capacity.
Will the 4‑inch, 4‑ohm speakers work with my existing head unit that powers 6.5‑inch, 4‑ohm door speakers?
Yes — both present a 4‑ohm load, so the head unit can drive them, though the smaller 4‑inch cones will produce less mid‑bass than 6.5‑inch units.
How can I verify the 90 dB sensitivity is being achieved after installation?
Play a 1 kHz test tone at 1 W input and measure output at 1 metre; a reading near 90 dB confirms the rated sensitivity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PAC
PAC APH-TY02 Speaker Connection Harness Toyota Lexus 18
- Car Stereo Add-Ons
$46.99
0.00054704BTC
In stock
The Wires Zone
The Wires Zone Platinum 1/0 AWG Ring Terminals Pair
- Connector and Termi…
$9.99
0.0001163BTC
In stock