We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black plastic basket, non-pressed paper cone, foam surround, dual voice coil, 6.5 inch car subwoofer

Pyle PLPW6D 6.5" Car Subwoofer 600W Dual 4 Ohm

SKU CH-CMCD-K2ZFV

A 6.5 inch car subwoofer delivers 600 watt peak power with dual 4 ohm voice coils and 89 dB sensitivity

  • TypeSubwoofer
  • Subwoofer Size6.5 inches
  • Frequency Response1 KHz
  • Impedance1 ohm
  • Dimensions9.7 in x 17.6 in x 18.0 in
  • Color6-inch
  • Delivers 300 W RMS and 600 W peak for powerful bass
  • Dual 4-ohm voice coil allows 4-ohm or 8-ohm wiring options
  • 30 oz magnet and 89 dB sensitivity produce clear, resonant low frequencies
  • Treated foam surround and non-pressed paper cone ensure durable, fatigue-resistant performance
  • Shallow 2.9 in mounting depth fits most car, boat or RV enclosures

6.5-inch dual-voice-coil subwoofer for compact

The Pyle PLPW6D is a 6.5-inch car subwoofer built for vehicles where enclosure space is limited. Its dual 4-ohm voice coils allow wiring at 4 or 8 ohms to match amplifier requirements. The unit suits car, boat or RV audio upgrades that need extra low-end punch without a large box.

300-watt RMS ceiling defines real-world output

Continuous power handling is 300 watts RMS with a 600-watt peak rating, so sustained output stays within the RMS figure. The 89 dB sensitivity means the subwoofer needs moderate amplifier power to reach high volume. Frequency response is listed at 1 kHz, indicating the driver is intended for bass reinforcement rather than full-range playback.

2.9-inch mounting depth eases tight-fit installs

A shallow 2.9-inch mounting depth lets the subwoofer fit behind factory panels or in slim custom boxes. The non-pressed paper cone and treated foam surround resist fatigue from constant excursion. Spring-loaded push-down terminals accept bare wire quickly, and the 30-ounce magnet structure keeps the motor cool during extended play.

Highlights

  • Delivers 300 W RMS and 600 W peak for powerful bass
  • Dual 4-ohm voice coil allows 4-ohm or 8-ohm wiring options
  • 30 oz magnet and 89 dB sensitivity produce clear, resonant low frequencies
  • Treated foam surround and non-pressed paper cone ensure durable, fatigue-resistant performance
  • Shallow 2.9 in mounting depth fits most car, boat or RV enclosures

Specifications

BrandPYLE
TypeSubwoofer
Subwoofer Size6.5 inches
Frequency Response1 KHz
Impedance1 ohm
Dimensions9.7 in x 17.6 in x 18.0 in
Color6-inch
Package ContainPower Series Dual Voice-coil 4ohm Subwoofer (6.", 600 Watts)

Questions about this item

Should I choose the 4 ohm or 8 ohm wiring option for this dual voice coil subwoofer?

The dual 4 ohm voice coils can be wired in parallel for a 2 ohm load or in series for an 8 ohm load, giving you flexibility to match your amplifier's stable impedance range.

What does the 600 watt peak power rating mean for daily listening?

The subwoofer handles 300 watts RMS continuously, so the 600 watt peak figure represents short bursts during heavy bass hits rather than sustained output.

How does the 1 ohm impedance specification affect amplifier matching?

The spec sheet lists a 1 ohm impedance value, but the dual 4 ohm voice coils actually present a 2 ohm or 8 ohm load depending on wiring, so use the coil configuration to match your amp.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.