Pyle
Pyle PLMRWKBT85WT 8" Marine Speaker System 300W Bluetooth 4.0
Water-resistant 8-inch 2-way marine speaker pair with Bluetooth 4.0, 300 W peak power, built-in LED lighting and included mounting hardware for bars up to 2.35 inches
- TypeMarine Speaker
- Bluetooth CompatibleYes
- Driver Design2-way Speaker
- Speaker Size8"
- Voice CoilSingle
- EnclosureBullet-style, water-resistant ABS housing
- Bluetooth 4.0 streams music wirelessly from 30+ ft away
- IP-44 water-resistant ABS housing withstands marine conditions
- 300 W peak power with 150 W RMS drives full-range audio
- 8-inch woofer plus 1-inch tweeter covers 40 Hz to 20 kHz
- Mounting brackets included for bars up to 2.35 inches
Marine Wakeboard Speaker System
The Pyle PLMRWKBT85WT is a two-piece 8-inch marine speaker system built for wakeboard towers, boat bars and similar outdoor mounts. It targets boat owners and powersport riders who want wireless audio without running source cables across the deck.
Thermals Noise Power Draw
The system runs on 12 V DC and presents a 4-ohm load to the amplifier, drawing up to 300 watts peak and 150 watts RMS during normal playback. Passive radiator design means no internal fan noise, while the ABS enclosure handles heat dissipation in direct sun without thermal shutdown.
Bundled Accessories Software
Mounting brackets and hardware are included for bars up to 2.35 inches, allowing a single-person install with basic hand tools. Bluetooth 4.0 pairing replaces a wired head-unit connection, so the only cable required is the 12-volt power feed. No companion app or firmware updates are supplied.
Highlights
- Bluetooth 4.0 streams music wirelessly from 30+ ft away
- IP-44 water-resistant ABS housing withstands marine conditions
- 300 W peak power with 150 W RMS drives full-range audio
- 8-inch woofer plus 1-inch tweeter covers 40 Hz to 20 kHz
- Mounting brackets included for bars up to 2.35 inches
Specifications
| Brand | Pyle |
|---|---|
| Model | PLMRWKBT85WT |
| Type | Marine Speaker |
| Part Number | PLMRWKBT85WT |
| Bluetooth Compatible | Yes |
| Driver Design | 2-way Speaker |
| Speaker Size | 8" |
| Voice Coil | Single |
| Enclosure | Bullet-style, water-resistant ABS housing |
| Input Voltage | 12V DC |
| Built-in Crossover | Yes |
| Crossover Frequency Range | 40Hz - 20kHz |
| Load Impedance Capability | 4 Ohms |
| Peak Power | 300 Watts |
| RMS Power | 150 Watts |
| Components | (2) 8-inch speakers Mounting brackets and hardware |
| Frequency Response | 40Hz - 20kHz |
| Sensitivity | 91 dB |
| Impedance | 4 Ohm |
| Physical Dimension | (L x W x H): 11.41’’ x 10.24’’ x 14.25’’ inches |
| Features | Bluetooth 4.0 for wireless music streaming Built-in LED lights for stylish illumination Durable ABS construction with a water-resistant finish Easy mounting on bars up to 2.35 inches |
Questions about this item
How do I mount the PLMRWKBT85WT on a wakeboard tower and what step is often missed?
Use the included brackets to clamp the bullet-style ABS housing onto bars up to 2.35 inches; the step often missed is tightening both bracket bolts evenly so the 11.41 x 10.24 x 14.25 inch enclosure stays aligned and sealed.
What part of the PLMRWKBT85WT will need replacement after seasons on the water?
The butyl rubber surrounds on the 8-inch injection cones and the 1-inch polymer dome tweeters are the wear items; UV and salt exposure eventually degrade the surrounds, and the tweeter diaphragms can fatigue after prolonged high-output use.
At what point does the PLMRWKBT85WT hit its thermal or power limit during a long ride?
Sustained output above the 150-watt RMS rating will cause the voice coils to heat up first; the built-in crossover protects the tweeter, but the woofer’s single voice coil reaches thermal compression before the 300-watt peak ceiling is approached.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



