Pyle
Pyle PLMRWKBT62BK 6.5" marine wakeboard car speaker
Dual 6.5" marine wakeboard speakers with Bluetooth 4.0 streaming, IP-44 water resistance and built-in LED lights
- Type2-way Speaker
- Speaker Size6.5 inches
- Vehicle TypeMarine, Off-Road Vehicles
- ColorBlack
- Woofer MaterialInjection Cone
- Surround MaterialButyl Rubber
- Bluetooth 4.0 wireless streaming removes cable hassle
- IP-44 water-resistant housing survives marine spray and rain
- Dual 6.5'' 2-way design delivers 2 x 200 W peak power
- 60 Hz – 20 kHz range covers deep bass to crisp highs
- Heavy-duty ABS frame resists corrosion on boats and off-road rigs
Marine Wakeboard Speaker System
The Pyle PLMRWKBT62BK is a dual 2-way speaker system built for marine and off-road vehicles. Each 6.5-inch unit combines an injection cone woofer with a 1-inch polymer dome tweeter. Bluetooth 4.0 streaming lets you play audio wirelessly from a phone or tablet. The heavy-duty ABS housing is water-resistant to IP-44 and fits mounting bars up to 2.35 inches in diameter.
Power Handling and Sound Output
Each speaker handles 100 Watts RMS and 200 Watts peak power for dynamic output. The 4 Ohm impedance and 90 dB sensitivity allow efficient use with typical marine amplifiers. Frequency response spans 60 Hz to 20 kHz, covering full-range stereo sound. The butyl rubber surround resists corrosion and staining in harsh environments.
Mounting Hardware and LED Lighting
Included brackets and hardware simplify installation on wakeboard towers or roll bars. Built-in LED lights add visibility and style during low-light operation. The compact mini-box design suits tight mounting spaces on boats, ATVs and off-road vehicles. No additional wiring adapters or software are supplied in the package.
Highlights
- Bluetooth 4.0 wireless streaming removes cable hassle
- IP-44 water-resistant housing survives marine spray and rain
- Dual 6.5'' 2-way design delivers 2 x 200 W peak power
- 60 Hz – 20 kHz range covers deep bass to crisp highs
- Heavy-duty ABS frame resists corrosion on boats and off-road rigs
Specifications
| Brand | PYLE |
|---|---|
| Type | 2-way Speaker |
| Speaker Size | 6.5 inches |
| Model | PLMRWKBT62BK |
| Vehicle Type | Marine, Off-Road Vehicles |
| Color | Black |
| Woofer Material | Injection Cone |
| Surround Material | Butyl Rubber |
| Tweeter | 1’’ Polymer Dome |
| Voice Coil | 1" |
| Magnet Construction | 10 oz. Magnet Structure |
| Frame Construction | Heavy-Duty ABS Construction |
| Part Number | PLMRWKBT62BK |
| Peak Power | 2 x 200 Watts |
| RMS Power | 2 x 100 Watts |
| Sensitivity | 90 dB |
| Frequency Response | 60Hz - 20kHz |
| Impedance | 4 Ohm |
| Cut-out Dimensions | Fits Mounting Bars up to 2.35’’ Diameter |
Questions about this item
How do I install the speakers on a 2.35-inch wakeboard tower bar, and what step is often missed?
Clamp the included brackets around bars up to 2.35 inches in diameter, then tighten all hardware evenly; the step often missed is securing the Bluetooth antenna wire so it cannot vibrate loose.
What maintenance will the butyl rubber surrounds and IP-44 housing need over time?
Rinse the speakers with fresh water after salt exposure, wipe the LED lenses clean, and inspect the butyl rubber surrounds annually for cracking or UV damage.
At what point does the 100-watt RMS thermal limit appear during continuous high-volume playback?
Sustained output at or above 100 watts RMS per speaker will cause the voice coils to hit their thermal ceiling, triggering protection or distortion.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PAC APH-TY02 Speaker Connection Harness Toyota Lexus 18
- Car Stereo Add-Ons
The Wires Zone Platinum 1/0 AWG Ring Terminals Pair
- Connector and Termi…



