We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Round black marine audio controller with flush-mount face, USB and aux ports, IP65 rated

Pyle

Pyle PLMRBT20 Amplified Bluetooth 5.0 Audio Controller 300W MAX 4x35W RMS

SKU CH-5HVQ-ZVDFR MPN PLMRBT20

Waterproof amplified Bluetooth 5.0 controller with 300W MAX power and 4x35W RMS for marine and off-road vehicles

  • TypeAmplified Wireless Bluetooth Audio Controller
  • FeaturesUniversal mount for wireless Bluetooth streaming IP-65 water
  • Height4.17 inches
  • Width3.8 inches
  • Length3.8 inches
  • WeightApproximately 1.5 lbs
  • Bluetooth 5.0 wireless streaming up to 30 ft
  • IP-65 waterproof rating protects against marine and outdoor conditions
  • Built-in Class-D amplifier delivers 300 W MAX power
  • Four-channel design provides 35 W RMS per channel at 4 Ohms
  • USB 2 A charging port keeps devices powered

Marine Bluetooth Audio Controller

The Pyle PLMRBT20 is a compact, round Bluetooth 5.0 audio controller with a built-in Class-D amplifier rated at 300W MAX and 4x35W RMS at 4 Ohms. Its IP-65 waterproof rating and rugged construction suit marine, off-road and powersport installations. The unit flush-mounts in a 3-inch cut-out and includes a mounting kit, 3.5mm audio cable and 2A USB charging port.

Best for open-cockpit vehicles

This controller suits owners of boats, ATVs, UTVs and convertibles who need a waterproof source unit with integrated amplification and wireless streaming up to 30+ ft. Buyers who require a full-size head unit with a display, CD playback or multi-zone audio control should look elsewhere. It also lacks the pre-amp channel count needed for complex multi-amplifier systems.

4x35W RMS four-channel amplifier

The integrated four-channel amplifier delivers 35W RMS per channel into 4 Ohms, letting the unit drive four speakers directly without external amps. Pre-amp RCA outputs are available for adding subwoofers or additional amplifiers. Frequency response spans 10Hz to 40kHz, and the 2A USB port keeps phones charged while streaming.

Highlights

  • Bluetooth 5.0 wireless streaming up to 30 ft
  • IP-65 waterproof rating protects against marine and outdoor conditions
  • Built-in Class-D amplifier delivers 300 W MAX power
  • Four-channel design provides 35 W RMS per channel at 4 Ohms
  • USB 2 A charging port keeps devices powered

Specifications

BrandPyle
ModelPLMRBT20
TypeAmplified Wireless Bluetooth Audio Controller
FeaturesUniversal mount for wireless Bluetooth streaming
IP-65 waterproof rating for marine and outdoor use
Built-in Class-D amplifier with 300W MAX power output
USB charging (2A) and Aux (3.5mm) input
Compatible with a wide range of devices including smartphones, tablets, and laptops
Soft turn-on/off and overload protection circuitry
Height4.17 inches
Width3.8 inches
Length3.8 inches
WeightApproximately 1.5 lbs
CableIncludes audio connection cable (3.5mm)
Channels4-channel amplifier
ColorBlack
CompatibilityCompatible with cars, trucks, ATVs, UTVs, boats, and powersport vehicles
Cut Out Diameter3 inches
Drilling RequiredYes
Frequency Response10Hz - 40kHz
Hardware IncludedFlush mounting kit
Audio connection cable
Head Unit SizeCompact, round design
InputsUSB port, Aux (3.5mm) input
MaterialDurable weather-resistant materials
Max Recommended Power Handling300W MAX
OutputsPre-amp RCA
PowerDC 12V
RangeWireless range up to 30+ ft
Size/Dimensions3.8” x 3.8” x 4.17”
SNR95dB
THD0.1%
VoltageDC 12V

Questions about this item

How many watts RMS per channel does the built-in amplifier deliver continuously?

The integrated Class-D amplifier provides 35W RMS per channel at 4 Ohms across four channels.

Does the IP-65 rated chassis stay cool and quiet during all-day operation?

The Class-D amplifier runs efficiently with minimal heat, and the sealed IP-65 enclosure has no fan, so it operates silently.

What size mounting hole must I cut for the 3-inch flush-mount design?

A 3-inch diameter cut-out is required, and the included flush-mounting kit secures the round chassis.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.