We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black marine mono amplifier with chrome RCA inputs and terminal blocks, compact 14.33 by 8.13 by 2.28 inches

Pyle

Pyle INV1000DBA Marine Mono Class D Amplifier 2000W Max 1000W RMS 1 Ohm

SKU CH-Y8CH-A4SX9 MPN INV1000DBA

Marine mono Class D amplifier delivers 1000W RMS at 1 ohm with Bluetooth streaming, remote bass control, and built-in crossover protection

  • TypeMarine Amplifier
  • Preamp Outputs2-channel
  • Bluetooth CompatibleYes
  • Amplifier ClassClass D
  • Amplifier ChannelsMono
  • Input Voltage14.4V DC
  • Bluetooth streaming adds wireless convenience
  • 1000 W RMS at 1 ohm delivers strong bass output
  • Class D topology runs efficiently with less heat
  • Remote control lets you adjust bass level from the seat
  • Low-pass filter and 0-18 dB bass boost shape the subwoofer tone

Marine mono Class D amplifier 2000W max

The Pyle INV1000DBA is a marine mono-block Class D amplifier rated at 2000W peak and 1000W RMS at 1 ohm. It delivers high-current output through dual discrete drive stages and includes Bluetooth streaming plus a remote bass control. The unit targets boat owners and vehicle installers who need a compact subwoofer amplifier with wireless input.

Check voltage load and signal source

Verify your electrical system supplies 14.4V DC and can support three 30A fuses before ordering. The amplifier accepts 4, 2 or 1 ohm loads and provides chrome RCA inputs with line-level outputs. A high-to-low converter is included for speaker-level sources, but no speaker-level inputs are built in.

Thermals noise and power draw

Class D topology and advanced protection circuitry manage thermal, overload and short-circuit conditions during normal use. The crossover operates from 50Hz to 250Hz with bass boost up to 18dB at 50Hz. Current draw scales with output level and load impedance; the compact chassis measures 14.33 x 8.13 x 2.28 inches.

Highlights

  • Bluetooth streaming adds wireless convenience
  • 1000 W RMS at 1 ohm delivers strong bass output
  • Class D topology runs efficiently with less heat
  • Remote control lets you adjust bass level from the seat
  • Low-pass filter and 0-18 dB bass boost shape the subwoofer tone

Specifications

BrandPyle
ModelINV1000DBA
TypeMarine Amplifier
Part NumberINV1000DBA
Preamp Outputs2-channel
Bluetooth CompatibleYes
Amplifier ClassClass D
Amplifier ChannelsMono
Input Voltage14.4V DC
Built-in CrossoverYes
Crossover Frequency Range50Hz - 250Hz
Bass Boost Control0 - 18dB at 50Hz
Load Impedance Capability4 Ohms, 2 Ohms, 1 Ohm
Fuse Rating30A x 3
I/O PortsChrome RCA Inputs, Line Output Channels
Peak Power2000 Watts Max
RMS Power400W @ 4 Ohms, 700W @ 2 Ohms, 1000W @ 1 Ohm
ComponentsAmplifier, High to Low Converter, Tapping Screws, Remote Control, Telephone Wire
Frequency Response0Hz - 250Hz
Impedance4 Ohms, 2 Ohms, 1 Ohm
THD<0.01%
SNR>90dB
Physical Dimension14.33'' x 8.13'' x 2.28'' inches
FeaturesAdvanced protection circuitry, low pass filter, subsonic circuitry, phase adjustment

Questions about this item

What comes in the box with the INV1000DBA and what must I buy separately?

The package includes the amplifier, a high-to-low converter, tapping screws, a remote control and telephone wire. You will need to supply power and ground cables, a fuse holder and speaker wire to complete the installation.

Which impedance load should I choose for the INV1000DBA — 4 Ω, 2 Ω or 1 Ω?

The amp delivers 400 W RMS at 4 Ω, 700 W RMS at 2 Ω and 1000 W RMS at 1 Ω. Match the load to your subwoofer wiring and the output you want; lower impedance yields more power but draws more current.

What does the 2000 W peak figure mean when the INV1000DBA is installed in a 14.4 V system?

The 2000 W rating is a short-term peak; continuous output is 1000 W RMS at 1 Ω, 700 W RMS at 2 Ω or 400 W RMS at 4 Ω, all measured at 14.4 V DC input.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.