We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of black 6.5 inch coaxial car speakers with piezo tweeters and polyimide midrange domes

PYLE CH6530 6.5" 3-Way Car Speakers Pair 300W Peak

SKU CH-YPHQ-W3RYM MPN CH6530

Pair of 6.5-inch three-way car speakers handling 300 watts peak with 100 Hz to 18 kHz frequency response and 90 dB sensitivity

  • TypeTweeters
  • Speaker Size5"
  • ColorBlack
  • Woofer MaterialPolypropylene
  • Surround MaterialMetal
  • MidrangeCoaxial,Tweeter
  • 3-way design covers 100 Hz to 18 kHz for full-range sound
  • 150 W peak power per speaker handles demanding audio
  • 90 dB sensitivity produces clear output at low power
  • 1 in mounting depth fits most factory door openings
  • 3 lb pair weight keeps door panels light

Car door speakers for factory replacement

These 6.5-inch coaxial speakers arrive as a matched pair and handle 300 watts peak power with a 10-watt RMS rating. A polypropylene cone, rubber surround and stamped basket form the woofer, while a 0.5-inch piezo tweeter and 1-inch polyimide dome midrange complete the three-way design. The 4-ohm impedance suits most factory head units.

Vehicles with 6.5-inch openings and modest

Buyers who need high continuous output for competition-level volume should look at something else, as the 10-watt RMS figure limits sustained clean playback. Installers without a 5.5-inch cutout and at least 2.1 inches of mounting depth will also need a different speaker.

2.1-inch mounting depth decides fit

The speaker requires a 5.5-inch mounting hole and 2.1 inches of clearance behind the door panel. Measure the factory location before ordering; if the cavity is shallower the speaker will not seat properly.

Highlights

  • 3-way design covers 100 Hz to 18 kHz for full-range sound
  • 150 W peak power per speaker handles demanding audio
  • 90 dB sensitivity produces clear output at low power
  • 1 in mounting depth fits most factory door openings
  • 3 lb pair weight keeps door panels light

Specifications

BrandPYLE
TypeTweeters
Speaker Size5"
ModelCH6530
ColorBlack
Woofer MaterialPolypropylene
Surround MaterialMetal
MidrangeCoaxial,Tweeter
TweeterCoaxial,Tweeter
Voice CoilRubber, piezoelectric_driver
Frame ConstructionRubber
Part NumberCH6530
Peak Power30 Watts
RMS Power10 Watts
Frequency Response2.5 kHz - 18 kHz
Impedance4 Ohm
Mounting Depth6.63 inches
Package ContainUser's manual
FeaturesCoaxial,Tweeter, 6.5 inches, CAR, Coaxial, Passive, 300 watts, 18 KHz, 90 decibels, User's manual

Questions about this item

Will the 90 dB sensitivity and 10 W RMS let them run all day off a standard head unit without overheating?

Yes, the 90 dB @ 1 W sensitivity and 10 W RMS per pair mean a factory head unit can drive them continuously without thermal issues.

My car has no external amplifier — does the 4-ohm impedance and 10 W RMS work straight from the factory head unit?

The 4-ohm load and 10 W RMS match typical head-unit outputs, so an external amp is not required for normal listening.

Will the 5.5-inch mounting hole and 2.1-inch depth fit the same cut-out as my old 6.5-inch coaxials?

The 5.5-inch mounting hole and 2.1-inch depth suit many 6.5-inch factory openings, but measure your current cut-out to confirm.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.