We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Oval insulated ice bath tub with aluminium frame, 105 gallon capacity

Pyle

Pyle 105 Gallon Insulated Oval Ice Bath Tub

SKU CH-13D0-FGX35

A 105 gallon insulated oval tub with triple-layer thermal walls and an aluminium frame for one-person cold-plunge recovery indoors or out

  • 105-gallon capacity fits one person for full-body cold immersion
  • Triple-layer wall with EPE foam and air pocket holds water temperature longer
  • Freestanding inflatable design assembles in about 5 minutes with no tools required
  • Aluminium alloy frame and drop-stitch construction give a rigid, portable structure
  • 20 mm G½ inlets and outlets connect directly to standard cold-plunge chillers

105 Gallon Cold Plunge Tub

This insulated oval tub holds 105 gallons of water for single-person cold therapy. It targets athletes and fitness enthusiasts who want recovery sessions at home, in a gym or outdoors. The freestanding design requires no permanent installation.

Triple-Layer Thermal Insulation

A triple-layer wall with EPE foam and an air pocket keeps water cold for extended periods without active cooling. The structure relies on passive insulation, so there are no fans, pumps or electrical noise during use. Power draw is zero unless a separate chiller is connected.

Aluminum Frame and Chiller Ports

Premium aluminum alloy supports and drop-stitch fabric create a rigid yet portable pod that sets up in roughly 15 minutes. Standard 20 mm G1/2 DN15 inlets and outlets accept the SereneLife Water Chiller or other compatible chillers, letting users add active temperature control when desired.

Highlights

  • 105-gallon capacity fits one person for full-body cold immersion
  • Triple-layer wall with EPE foam and air pocket holds water temperature longer
  • Freestanding inflatable design assembles in about 5 minutes with no tools required
  • Aluminium alloy frame and drop-stitch construction give a rigid, portable structure
  • 20 mm G½ inlets and outlets connect directly to standard cold-plunge chillers

Specifications

BrandPyle

Questions about this item

How do I assemble the inflatable tub and what step is often missed?

Unfold the tub, insert the aluminum alloy supports into the drop-stitch sleeves, then inflate the air pocket layer; the step people skip is fully seating each support before inflation, which keeps the oval shape rigid.

What parts will need replacement after repeated use?

The drop-stitch fabric and EPE foam insulation are built into the triple-layer wall and are not user-replaceable; only the 20 mm G1/2 water inlet and outlet fittings can be unscrewed and swapped if they wear or leak.

What limits how long the water stays cold during back-to-back plunges?

The triple-layer wall with EPE foam and an air pocket slows heat gain, so the first limit under sustained use is the insulation’s thermal capacity — once the water warms past the target temperature the session ends until it is re-chilled.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.