We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact white GaN wall charger with foldable plug and three USB-C ports

Pxwaxpy 150W USB-C Charger GaN III 3-Port 100W PD 3.1

SKU CH-C6D7-HQS5X

A 150W GaN III charger with three ports delivers 100W from USB-C1 to charge a 16" MacBook Pro to 60% in 30 minutes while two additional ports share 50W.

  • Charges a MacBook Pro 16" to 60 % in 30 minutes via 100 W USB-C1 port
  • Powers three devices simultaneously with 150 W total output across three ports
  • GaN III stacked design shrinks the adapter 60 % smaller than other 150 W chargers
  • Foldable plug and 7.87 oz weight make it easy to carry for travel
  • Meets IEC 62368-1 safety standard with continuous temperature monitoring

150W GaN III USB-C Charger

The Pxwaxpy 150W USB-C charger uses GaN III technology to deliver up to 150W total output across three ports. USB-C1 provides up to 100W Power Delivery 3.1 for laptops, while the remaining two ports share 50W. A foldable plug and compact 2.64x2.48x1.24in form factor make it suited for travel and desktop consolidation.

Best for multi-device USB-C users

This charger suits owners of USB-C laptops, tablets and phones who want a single 100W PD 3.1 port plus two additional ports for simultaneous charging. It is not for devices that require proprietary barrel connectors or legacy USB-A only cables. Buyers needing more than 100W on a single port or more than three total ports should look at higher-capacity multi-port stations.

Simple plug-in installation

Install by unfolding the integrated prongs and inserting into a standard AC outlet; no drivers or configuration are required. The unit meets IEC 62368-1 safety standards and performs continuous temperature monitoring. The main issues are ensuring cables support the desired wattage and confirming device compatibility with PD 3.1 or PPS profiles for maximum speed.

Highlights

  • Charges a MacBook Pro 16" to 60 % in 30 minutes via 100 W USB-C1 port
  • Powers three devices simultaneously with 150 W total output across three ports
  • GaN III stacked design shrinks the adapter 60 % smaller than other 150 W chargers
  • Foldable plug and 7.87 oz weight make it easy to carry for travel
  • Meets IEC 62368-1 safety standard with continuous temperature monitoring

Specifications

BrandPxwaxpy

Questions about this item

Which devices must already support USB-C Power Delivery 3.1 to reach the 100 W single-port output?

Only devices that implement USB-C PD 3.1 can negotiate the full 100 W from the USB-C1 port; older PD versions will fall back to their maximum supported level.

If I keep a 96 W MacBook power brick, how does this charger compare in size?

The GaN III unit is 53 % smaller than that 96 W brick while still delivering up to 100 W from one port and 150 W total across three ports.

How can I confirm the charger is delivering the advertised 100 W to my MacBook Pro 16″?

The MacBook’s battery menu will show a charge rate near 100 W and the system should reach roughly 60 % in 30 minutes when connected to the USB-C1 port alone.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.