PUTORSEN
PUTORSEN Laptop Pole Mount Tray 12-18 Inch Black 2 in 1 Accessories
A steel pole-mount tray holds 12 to 18 inch laptops up to 15.4 lbs on 1.1 to 2.4 inch poles with full tilt, swivel and rotation plus integrated cable clips
- Supports 12 to 18 inch laptops up to 15.4 lbs
- Fits poles 1.1 to 2.4 inches in diameter
- Full motion: ±35° tilt, 180° swivel, 360° rotation
- Removable 75mm and 100mm VESA plate included
- Integrated cable management clips keep cords tidy
Pole-Mount Tray for 12-18 Inch Laptops
This steel laptop arm clamps onto poles measuring 1.1 to 2.4 inches in diameter. It holds devices from 12 to 18 inches weighing up to 15.4 lbs. A removable VESA plate supports 75mm and 100mm patterns for alternative mounting options. Integrated cable clips keep cords organised along the arm.
Suits Users Needing Flexible Pole Mounting
Ideal for professionals sharing screens or adjusting viewing angles frequently. The tray provides +35 to -35 degree tilt, 180 degree swivel, and 360 degree rotation. Builders without a suitable pole diameter or those needing a desk-clamp or wall-mount solution should look at other mounting types.
Straightforward Assembly With Included Hardware
All necessary fixings and clear instructions are supplied for quick setup. The detachable VESA plate simplifies attachment to the arm. Ensure the pole diameter falls strictly within the 1.1 to 2.4 inch range; clamping outside this range risks instability or damage to the pole surface.
Highlights
- Supports 12 to 18 inch laptops up to 15.4 lbs
- Fits poles 1.1 to 2.4 inches in diameter
- Full motion: ±35° tilt, 180° swivel, 360° rotation
- Removable 75mm and 100mm VESA plate included
- Integrated cable management clips keep cords tidy
Specifications
No published specifications for this item yet.
Questions about this item
What pole diameter must my desk or mount have for the 1.1 to 2.4 inch clamp to grip it?
The clamp fits any round pole from 1.1 inches up to 2.4 inches in diameter, so measure your pole before buying.
Can I keep using my monitor arm that has a 75 mm or 100 mm VESA plate with this tray?
Yes, the tray includes a removable VESA plate with both 75 mm and 100 mm hole patterns for direct attachment.
How do I verify the +35 to -35 tilt, 180 swivel and 360 rotation move smoothly after install?
Adjust the tray through the full tilt range, swivel it side to side and rotate the screen; all motions should glide without binding.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
