PULS Power
PULS ML15.051 100-240V AC 5-5.5V DC 15W 3A DIN Rail line protection
DIN-rail switching supply delivers 5–5.5 V DC at 3 A from 100–240 V AC input with 15 W output
- Wide input range 100 to 240V AC suits global mains
- Compact DIN rail module 22.5 mm wide fits tight panels
- 15 W output at 5 to 5.5V DC powers low-voltage loads
- High efficiency and long lifetime reduce running cost
- Green LED status indicator shows operation at a glance
MiniLine DIN-Rail Supply
The PULS ML15.051 is a compact switching power supply built for DIN-rail mounting in control cabinets. It accepts 100 to 240V AC or 110V DC input and delivers a regulated 5 to 5.5V DC output at 3.0A. The unit suits automation panels, sensor networks and low-voltage logic circuits that need a narrow 22.5mm footprint.
15W at 3.0A Output
The single specification that decides fit is the 15W power rating combined with a 3.0A current limit at 5 to 5.5V DC. Loads drawing more than 3.0A or requiring a higher voltage will not operate correctly. The supply is NEC Class2 compliant, so wiring can follow Class 2 rules without additional fusing in many jurisdictions.
Sustained Load Behaviour
Under continuous load the converter maintains output noise below 50mV and provides 45msec hold-up time during brief input interruptions. Efficiency stays high across the -10°C to 70°C operating range, and the green LED gives immediate status confirmation. The plastic case meets IP20 protection for indoor cabinet use.
Highlights
- Wide input range 100 to 240V AC suits global mains
- Compact DIN rail module 22.5 mm wide fits tight panels
- 15 W output at 5 to 5.5V DC powers low-voltage loads
- High efficiency and long lifetime reduce running cost
- Green LED status indicator shows operation at a glance
Specifications
| Brand | PULS |
|---|
Questions about this item
What does the 15 W rating mean once the unit is installed in a cabinet?
It is the continuous output power the supply can deliver at 5 to 5.5 V DC, 3.0 A, while operating between -10 °C and 70 °C with 45 ms hold-up time.
How does the 100 to 240 V AC input range affect installation on a single-phase 50 to 60 Hz supply?
The wide-range input accepts 100 to 240 V AC or 110 V DC directly, so no selector switch or external transformer is needed for global single-phase mains.
What space does the 22.5 mm wide plastic case need on a DIN rail?
The module measures 22.5 mm wide, 75 mm high and 91 mm deep, clips onto standard DIN rail and meets IP20 protection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



