We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal DIN-rail power supply, 124 by 60 by 117 mm, green LED indicator

PULS Power

PULS CS10.481 DC Power Supply 240W 48-52V 5A

SKU CH-TDQA-V9SA0

DIN-rail switching supply delivers 48-52 V DC at 5 A from 100-120 V or 200-240 V AC input

  • TypePower Quality & Distribution
  • Delivers stable 48–52 V DC output for reliable equipment power
  • 240 W capacity handles demanding industrial loads with 5 A continuous current
  • Wide 100–120 V AC and 200–240 V AC input suits global mains supplies
  • DIN-rail mountable metal case fits standard panels at 60 mm wide
  • Operates from –25 °C to 70 °C for harsh environment durability

CS-Series DIN-Rail Supply

The PULS CS10.481 is a switching DC power supply that converts 100 to 120V or 200 to 240V AC input into a 48 to 52V DC output rated at 240W and 5.0A. It mounts on a standard DIN rail inside a metal enclosure measuring 124mm high, 60mm wide and 117mm deep. A green LED provides a visual status indicator and the unit operates across a -25 to 70°C temperature range.

Control Panels Not High-Voltage Installations

This supply suits automation engineers and panel builders who need a compact, single-phase source for 48V DC control circuits, sensors or actuators in industrial cabinets. It is not intended for installers who require three-phase input, higher output current than 5.0A, or an ingress rating above IP20. Buyers needing redundant or parallel operation should verify those features independently.

48-to-52V Adjustable Output Window

The adjustable output voltage range of 48 to 52V DC is the specification that determines whether this unit matches the load requirements. Equipment that demands a fixed 24V or 12V rail cannot use this supply without additional conversion.

Highlights

  • Delivers stable 48–52 V DC output for reliable equipment power
  • 240 W capacity handles demanding industrial loads with 5 A continuous current
  • Wide 100–120 V AC and 200–240 V AC input suits global mains supplies
  • DIN-rail mountable metal case fits standard panels at 60 mm wide
  • Operates from –25 °C to 70 °C for harsh environment durability

Specifications

BrandPULS
TypePower Quality & Distribution

Questions about this item

How do I confirm the CS10.481 is operating correctly after installation?

The green status LED lights when the unit is running normally; measure the DC output to verify it stays within the 48 to 52 V range and that the 5.0 A rating is met under load.

What comes in the box and what must I provide separately?

The CS10.481 power supply is supplied; you must provide the AC input wiring for 100 to 120 V or 200 to 240 V, the DC output cables, and a standard DIN rail for mounting.

Which voltage setting should I select for my 48 V system?

Choose the 48 V output setting; the adjustable range reaches 52 V if a slightly higher voltage is needed, and the unit delivers 240 W at 5.0 A continuous with a 6 A peak capability.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.