PTZOptics
PTZOptics Move SE 30x Optical Zoom PTZ Camera Gray
A PTZ camera capturing 1080p60 video with 30x optical zoom, auto-tracking, and HDMI, SDI, USB, and IP outputs for remote meetings
- 30x optical zoom captures distant detail clearly
- 1080p60 resolution delivers smooth high-definition video
- Auto-tracking follows presenters without an operator
- Four outputs — HDMI, 3G-SDI, USB and IP — fit any workflow
- 255 presets enable instant, repeatable camera positioning
Professional streaming and tracking camera
The PTZOptics Move SE captures up to 1080p60 over IP, HDMI, USB-C and 3G-SDI for classrooms, houses of worship and conference rooms. Auto-tracking follows a presenter around the room without an operator. Wide dynamic range and 3D noise reduction deliver strong low-light performance. An optional upgrade adds NDI|HX support.
Thermals noise and power draw
The unit runs silently during typical streaming and conferencing sessions with no audible fan noise reported in normal use. Power consumption stays low enough for standard PoE+ infrastructure when connected via IP. Heat output remains minimal during extended 1080p60 operation.
Bundled accessories and software impact
The included IR remote enables instant preset recall and manual pan-tilt-zoom control without extra hardware. Serial command support across RS-232, RS-485 and IP lets third-party controllers trigger any of the 255 stored positions. Dual-stream encoding in H.265, H.264 or MJPEG allows simultaneous recording and live distribution via SRT, RTSP or RTMP.
Highlights
- 30x optical zoom captures distant detail clearly
- 1080p60 resolution delivers smooth high-definition video
- Auto-tracking follows presenters without an operator
- Four outputs — HDMI, 3G-SDI, USB and IP — fit any workflow
- 255 presets enable instant, repeatable camera positioning
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the Move SE and which step is commonly missed?
Connect power, then link HDMI, 3G-SDI, USB-C or IP for video; the step often missed is assigning a static IP address before configuring RS-232 or RS-485 control so the camera stays reachable after a reboot.
What maintenance or replacement will the Move SE need later?
No user-serviceable parts are specified; plan only on occasional lens cleaning and firmware updates, while the 3.5 mm audio jack and preset memory (255 positions) remain solid-state for the camera's life.
What limit appears first during sustained use of the Move SE?
The 1080p60 output ceiling and dual-stream encoding (H.265/H.264/MJPEG) set the practical ceiling; prolonged sessions stay within that resolution and compression budget without thermal throttling mentioned.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



