Pstaroth
Pstaroth BTC-S37 8 GPU Server Chassis 1800W PSU 4G DDR3 128G mSATA SSD
Holds eight GPUs in a 19-inch rackmount frame with an 1800 W PSU, Intel B75 board, 4 GB DDR3 and 128 GB mSATA SSD
- Chassis TypeRackmount
- Eight GPU slots support large-scale mining builds
- 1800W PSU included powers eight cards and system
- 4 GB DDR3 and 128 GB mSATA SSD pre-installed
- Four 120 mm silent fans plus 80 mm CPU fan cool components
- Steel rackmount chassis assembles quickly for mass deployment
8 GPU Mining Chassis
The Pstaroth BTC-S37 is a rackmount server chassis pre-built for cryptocurrency mining. It integrates an Intel B75 motherboard with an onboard CPU, 4 GB of DDR3 memory and a 128 GB mSATA SSD. An 1800 W ATX power supply and eight PCIe x1 slots support up to eight graphics cards in a single 470 mm by 195 mm frame.
Suited for multi-GPU mining farms
This unit fits operators who want a ready-to-run, eight-card mining rig with integrated power and storage. Builders who need a socketed processor, more than 8 GB of total system memory or storage interfaces beyond SATA and mSATA should look elsewhere.
Eight PCIe x1 slots on PCIe 2.0
The motherboard provides eight physical PCIe x16 slots wired as x1 links running at PCIe 2.0 speed. This lane width and generation limit the bandwidth available to each installed graphics card.
Highlights
- Eight GPU slots support large-scale mining builds
- 1800W PSU included powers eight cards and system
- 4 GB DDR3 and 128 GB mSATA SSD pre-installed
- Four 120 mm silent fans plus 80 mm CPU fan cool components
- Steel rackmount chassis assembles quickly for mass deployment
Specifications
| Chassis Type | Rackmount |
|---|
Questions about this item
What does the 8 GPU slot count mean once the rig is assembled?
The chassis holds eight graphics cards simultaneously on the motherboard, and the supplier has tested compatibility with a wide range of GPUs for mining workloads.
What does the PCI-E 2.0 standard cap in practice?
Each PCIe x1 lane runs at Gen2 speeds, limiting bandwidth to the PCI-E 2.0 specification for every installed graphics card.
What does the 470 mm by 195 mm form factor need to fit or mount?
The CeB form factor board measures 470 mm by 195 mm and fits standard rackmount server chassis with matching mounting holes.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



