We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular flight case with silver trim, honeycomb texture, four casters and recessed handles

ProX

ProX XS-UTL10W Utility Case 16x16x47.5in 6 Cu Ft

SKU CH-8K3S-CK9SV

A 6 cu ft ATA-300 flight case with 4‑inch casters, locking wheels and foam‑lined interior for secure gear transport

  • ATA-300 style flight case rated for rugged transport
  • 3/8″ certified plywood shell with aluminium extrusion and riveted corners
  • Four 4″ rubber casters, two locking, plus stacking cups on the lid
  • Fully lined 1/4″ high-density foam interior cushions gear against impact
  • Three recessed butterfly latches and eight spring-loaded handles secure the load

Utility Case for Gear Transport

The ProX XS-UTL10W is a trunk-style utility case designed to protect microphones, stands, lighting fixtures and other hardware during transport. Its ATA-300 style construction meets road-ready standards for professionals who move equipment between venues. The certified 3/8-inch laminated plywood body and aluminium extrusion frame provide structural rigidity for frequent touring use.

Thermals Noise and Power Draw

As a passive protective enclosure, the case generates no heat, produces no audible noise and draws no electrical power during normal use. Interior high-density foam padding absorbs vibration and impact without active cooling or powered components. Four 4-inch rubber casters, two of which lock, allow silent manual positioning on stage or in storage.

Six Cubic Feet of Internal Volume

The case offers 6 cu. ft. of foam-lined capacity measured at 16 by 16 by 47.5 inches, determining how much gear fits in a single unit. Recessed butterfly latches and spring-loaded handles secured with washers keep the lid sealed under load. Top-mounted caster cups enable stable stacking of multiple cases for efficient truck packing.

Highlights

  • ATA-300 style flight case rated for rugged transport
  • 3/8″ certified plywood shell with aluminium extrusion and riveted corners
  • Four 4″ rubber casters, two locking, plus stacking cups on the lid
  • Fully lined 1/4″ high-density foam interior cushions gear against impact
  • Three recessed butterfly latches and eight spring-loaded handles secure the load

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the four 4" casters on the ProX XS-UTL10W, and which step do people often miss?

The case ships with the casters already mounted. The step people miss is engaging the two locking brakes before loading gear so the case cannot roll away during packing.

What maintenance will the recessed spring-loaded handles and butterfly latches need later?

Periodically check that the rivet washers stay tight and spray light silicone into the latch pivots and handle springs to keep them moving freely.

What limit appears first when the ProX XS-UTL10W is stacked and moved daily?

The 6 Cu. Ft. interior volume fills quickly, so weight distribution becomes the limiting factor before the 3/8" plywood or ATA-300 style construction shows stress.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.