ProX
ProX XS-19MIXLT 10U 19" Slanted Rackmount Mixer Case Black on Black
A 10U slanted 19" rackmount mixer case built to ATA-300 style with a sliding laptop shelf and locking front door, weighing 24.5 lbs
- ATA-300 style construction shields mixer from travel impacts
- 10U slanted 19-inch rack keeps gear organized and accessible
- Spring-action recessed handle eases transport of 24.5 lbs case
- Recessed butterfly twist-lock latches secure closure against vibration
- Locking front door with cable cover protects connected equipment
10U Slanted Rackmount Mixer Case
The ProX XS-19MIXLT is an ATA-300 style flight case built to house a 19-inch mixer in a 10U top-mount slanted rack. It targets professional DJs and audio technicians who need to transport and protect their equipment between gigs or studio sessions. The black-on-black finish gives it a clean stage appearance.
Spring Handle and Twist-Lock Latches
A spring-action recessed handle reduces the 24.5 lb weight burden during transport, while recessed butterfly twist-lock latches keep the lid sealed against vibration. The case ships fully assembled, so installation means simply racking the mixer with standard cage nuts. The only common issue is misaligning the slanted rails if the mixer depth exceeds the internal clearance.
19-Inch Rack Standard and Slant Geometry
The case follows the 19-inch EIA rack width and 10U vertical space, limiting the mixer to that height and width envelope. The fixed slant angle cannot be adjusted, so deep rear connectors may press against the lid when closed. The removable cable access cover on the locking front door allows wired connections to stay plugged in, but the door itself adds depth that must fit the venue's booth space.
Highlights
- ATA-300 style construction shields mixer from travel impacts
- 10U slanted 19-inch rack keeps gear organized and accessible
- Spring-action recessed handle eases transport of 24.5 lbs case
- Recessed butterfly twist-lock latches secure closure against vibration
- Locking front door with cable cover protects connected equipment
Specifications
No published specifications for this item yet.
Questions about this item
How do I confirm the ProX XS-19MIXLT is protecting my mixer correctly after loading it?
The case uses ATA-300 style construction with recessed butterfly twist-lock latches and a locking front door; verify all latches engage fully and the door locks while cables route through the removable access cover.
What components come with the ProX XS-19MIXLT and what must I provide?
The case includes a sliding laptop shelf, a removable cable access cover, a spring-action recessed handle, and rack rails for 10U of 19" gear; you supply the mixer, laptop, cables and any rack accessories.
Which capacity of the ProX XS-19MIXLT should I choose for my setup?
This model provides a single 10U top-mount 19" slanted rack configuration; choose it when your mixer and outboard fit within ten rack units and you need the angled access and integrated laptop shelf.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
