We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

ProX

ProX XC-PYR05 5 ft 1/4 in TS to Dual RCA Cable

SKU CH-H1X7-ZTKVW

Connects a 1/4 inch TS source to dual RCA inputs using 20 AWG oxygen-free copper conductors with 93% braided shielding over a 5 ft length

  • Connects 1/4" TS gear to dual RCA devices
  • 93% braided OFC shield reduces noise
  • 20 AWG OFC conductors preserve signal purity
  • Gold and silver plated metal connectors ensure durability
  • Compact diameter and tour-grade build resist wear

ProX XC-PYR05 5 ft Cable

The ProX XC-PYR05 is a 5 ft unbalanced audio cable with a 1/4 in TS connector on one end and dual RCA connectors on the other. It is built for professional touring and live sound applications where devices with dual RCA inputs or outputs must link to equipment using 1/4 in connections.

Upgrading From Basic Patch Cables

This cable replaces standard patch leads that lack adequate shielding or durable connector housings for stage use. The jump is worth it when signal runs are exposed to handling noise or frequent bending that would fatigue lesser cables.

93% Braided OFC Shield Headroom

The 20 AWG oxygen-free copper conductors and 93% braided shield comfortably handle analogue line-level signals while rejecting electromagnetic interference. The compact diameter reduces eddy currents, though the unbalanced design limits effective run length in high-noise environments.

Highlights

  • Connects 1/4" TS gear to dual RCA devices
  • 93% braided OFC shield reduces noise
  • 20 AWG OFC conductors preserve signal purity
  • Gold and silver plated metal connectors ensure durability
  • Compact diameter and tour-grade build resist wear

Specifications

No published specifications for this item yet.

Questions about this item

What connector sizes must my equipment have for this 5 ft cable to plug in?

One end uses a single 1/4 in TS plug and the other end splits into two RCA plugs, so the source needs a 1/4 in jack and the destination needs dual RCA jacks.

Which way round do I connect the 1/4 in TS end and the dual RCA ends for a signal coming from a mixer?

Plug the 1/4 in TS connector into the mixer output and the two RCA plugs into the recorder or amplifier inputs; reversing them sends signal the wrong way because the cable is unbalanced.

How often should I inspect the 93 % braided OFC shield and 20 AWG conductors for wear?

Check the shield coverage and conductor insulation before every gig; replace the cable if the braid shows gaps or the jacket cracks, as damaged shielding lets noise into the unbalanced signal path.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.