ProX
ProX X-4UE 4U Effects Rack
A 4U rack case with dual rails and 14-inch depth protects effects units and signal processors in a plywood shell rated to ATA 300
- Best protection for pro audio gear with 14" depth and dual rack rails
- Meets or exceeds ATA 300 spec for rugged transport durability
- Rugged extruded aluminum ball corners absorb impact during travel
- Recessed spring-loaded handles and butterfly twist latches for secure handling
- Non-slip rubber feet enable stable stacking in any setup
4U Rack Case for Effects and Processors
The ProX X-4UE is a 4U rack enclosure built to protect professional audio equipment and DJ gear during transport and installation. Dual rack rails provide secure mounting for effects units, filters, compressors, EQs and similar processors. The case meets or exceeds ATA 300 spec, confirming its suitability for demanding road and air travel. Rugged extruded aluminium ball corners and laminated 3/8-inch plywood construction form a durable shell that resists impact.
Behaviour Under Sustained Transport Load
The case maintains structural integrity when stacked, thanks to non-slip rubber feet and recessed spring-loaded handles that stay flush during transit. Recessed butterfly twist latches and dual anchor rivets keep the lid sealed under vibration and repeated handling. Mounting hardware is included so installed devices remain fixed in position over long periods. The 14-inch depth accommodates deeper processors without protruding beyond the frame.
Thermals Noise and Power Draw in Normal Use
As a passive enclosure, the unit generates no operational noise and draws no power. The plywood and aluminium construction does not produce heat, so thermal management depends entirely on the ventilation of the mounted equipment. Exterior dimensions are 19 inches wide, 12.5 inches deep and 8 inches high, with a weight of 21 lbs. Shipping dimensions are 13 inches long, 23 inches deep and 10.5 inches high at 23 lbs.
Highlights
- Best protection for pro audio gear with 14" depth and dual rack rails
- Meets or exceeds ATA 300 spec for rugged transport durability
- Rugged extruded aluminum ball corners absorb impact during travel
- Recessed spring-loaded handles and butterfly twist latches for secure handling
- Non-slip rubber feet enable stable stacking in any setup
Specifications
No published specifications for this item yet.
Questions about this item
How much heat or noise does the 14-inch deep rack produce when fully loaded and running continuously?
The ProX X-4UE is a passive enclosure with no fans or power supply, so it generates no noise or heat of its own; thermal and acoustic performance depends entirely on the rack-mounted equipment installed inside.
What existing hardware is required to mount equipment in the dual rack rails?
The case includes mounting hardware for the rails; you only need standard 19-inch rack-mount devices and the supplied screws to secure them.
Will the 3/8-inch plywood construction and ATA 300 rating protect vintage effects units during frequent transport?
The laminated 3/8-inch plywood, extruded aluminum ball corners, dual anchor rivets and ATA 300-compliant design are built to shield rack gear from shock and vibration on the road.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
