We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of 9006 LED bulbs with aluminium housings and cooling fans

Protekz

Protekz 9006 LED Headlight Kit 12000LM 6000K 2016 Mitsubishi Lancer

SKU CH-R4FK-NC614

LED 9006 low-beam conversion kit for 2016 Mitsubishi Lancer delivers 12,000 lumens total at 6000K with CREE chips, IP68 waterproofing and built-in cooling fans

  • TypeBulbs
  • Size9006 / HB4
  • Light SourceLED
  • QualityPerformance
  • Instant full brightness with zero warm-up delay
  • 12000 lumens total output from twin CREE LMD bulbs
  • IP68 waterproof rating handles harsh weather conditions
  • Direct 9006 fitment for 2016 Mitsubishi Lancer low beams
  • Over 50000 hours operating life from aviation-grade aluminum cooling

Fitment and Purpose

This Protekz LED kit is a direct replacement for the 9006 low-beam bulbs in a 2016 Mitsubishi Lancer. It delivers 12000 total lumens at a 6000K colour temperature for drivers who want brighter, whiter light without rewiring. The bulbs operate on 9V to 32V DC systems, covering both 12V and 24V vehicles. They are not suited for high-beam or fog-light positions that use a different bulb size.

Thermals and Power

Each bulb draws 120W and 2A, with a built-in turbo fan that spins between 5000 and 12000 RPM to push over 7 CFM of airflow. The aviation-grade 6063 aluminium shell and smart-system chip keep the operating temperature at 85 degrees across a -40 to +80 degree range. IP68 waterproofing protects the internals from moisture and dust. Instant-on output reaches 100 percent brightness with zero warm-up time.

Installation and Compatibility

The kit includes two bulbs and a user manual for a plug-and-play swap into the factory 9006 sockets. Canbus-ready electronics prevent dashboard errors on most modern vehicles. The 360-degree beam angle and exclusive curve-beam technology aim to preserve the original cut-off pattern. Buyers needing a different bulb size, a high-beam kit, or a non-fan-cooled design should look elsewhere.

Highlights

  • Instant full brightness with zero warm-up delay
  • 12000 lumens total output from twin CREE LMD bulbs
  • IP68 waterproof rating handles harsh weather conditions
  • Direct 9006 fitment for 2016 Mitsubishi Lancer low beams
  • Over 50000 hours operating life from aviation-grade aluminum cooling

Specifications

TypeBulbs
Size9006 / HB4
Light SourceLED
QualityPerformance

Questions about this item

How do I install the 9006 LED bulbs in my 2016 Mitsubishi Lancer low-beam housing, and what is the common mistake?

The kit is a direct replacement for the factory 9006 halogen bulbs; twist the old bulbs out, insert the new LED units, and connect the plug. The step most people miss is securing the external driver box and fan assembly so they do not vibrate loose or contact hot surfaces.

What maintenance or replacement will the cooling fan and LED chips need over time?

The high-speed cooling fan runs at 5000-12000 RPM and the CREE LMD chips are rated for over 50000 hours; no scheduled maintenance is required, but if the fan becomes noisy or stops spinning, the entire bulb assembly should be replaced to prevent overheating.

At what temperature does the thermal protection limit output during extended night driving?

The smart system chip regulates fan speed to keep the operational temperature at an ideal 85 degrees; if the aluminium housing exceeds its -40 to +80 degree operating range, the chip will reduce power to protect the LEDs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.