We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow steel cable loop with dual D-rings and carabiner, 6 ft long

Protecta

Protecta 2190102 Dual-ring Tie-Off Adaptor traffic safety equipment

SKU CH-6HVR-XPJQE

Dual-ring tie-off adaptor with alloy and galvanized steel construction, 310 lb capacity, and 5,000 lb tensile strength meeting ANSI Z359.18 and OSHA 1910.140 standards

  • Dual D-ring anchor point enables secure tie-off for one worker
  • 6 ft cable length provides flexible reach across work areas
  • 5,000 lb tensile strength meets 1926.502 and ANSI Z359.18 requirements
  • 310 lb weight capacity supports user with tools per OSHA 1910.140
  • Alloy and galvanized steel construction resists corrosion for repeated reuse

Dual-Ring Tie-Off Adaptor

The Protecta 2190102 is a fall-protection anchor designed for a single worker up to 310 lb. It meets OSHA 1910.140, OSHA 1926.502 and ANSI Z359.18 for construction and general-industry use. Alloy and galvanised steel construction provides the required 5,000 lb tensile strength.

Installation and common issues

The 6 ft cable wraps around a suitable structure and the pass-through D-ring is pulled back through the opposite ring to choke the anchor in place. No tools or permanent fasteners are required, so the device is reusable across job sites. The only common error is wrapping the cable around an edge or structure that cannot sustain the 5,000 lb requirement.

Single-worker weight limit

This adaptor is rated for one person with a combined weight of 310 lb including tools and clothing. Crews needing to attach two workers simultaneously must use a separate, independently rated anchor for each person.

Highlights

  • Dual D-ring anchor point enables secure tie-off for one worker
  • 6 ft cable length provides flexible reach across work areas
  • 5,000 lb tensile strength meets 1926.502 and ANSI Z359.18 requirements
  • 310 lb weight capacity supports user with tools per OSHA 1910.140
  • Alloy and galvanized steel construction resists corrosion for repeated reuse

Specifications

Brand3M PROTECTA

Questions about this item

How can I verify the Protecta 2190102 Dual-ring Tie-Off Adaptor is functioning correctly after installation?

After setup, inspect the dual D-rings and carabiner for secure engagement, confirm the 6 ft cable lies without kinks, and ensure the anchor holds the rated 310 lb worker capacity per OSHA 1910.140 and ANSI Z359.18.

What components are included with the Protecta 2190102 and what must be purchased separately?

The adaptor ships with dual O-rings, a pass-through end D-ring, and a carabiner tie-off connector; a compatible harness and any required structural anchor point are not included.

Which version of the Protecta 2190102 should I select for a single worker needing a 6 ft steel cable anchor?

The single model listed — 6 ft overall length, 1/4 in width, alloy and galvanized steel construction, rated for one worker at 310 lb — matches that requirement.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.