PRORECK
PRORECK 712D4x2 12 inch car subwoofer 800W RMS 4 ohm
A pair of 12-inch dual 4-ohm voice coil subwoofers rated at 800W RMS each for deep car audio bass
- TypeSubwoofer
- Subwoofer Size12 inches
- Frequency Response45 hertz
- Impedance4 ohm
- ColorBlack
- FeatureDual Voice Coil
- Deep bass driven by 800W RMS power handling
- Flexible amplifier matching through dual voice coil design
- Full low-frequency reproduction from 12-inch cone
- Engineered specifically for in-vehicle audio systems
- Durable build rated for 2400W max power handling
PRORECK 12-Inch Dual Subwoofer Pair
The PRORECK 712D4x2 supplies two 12-inch subwoofers in a single package, each rated at 800W RMS and 4 ohms impedance. Dual voice coils on every driver give wiring flexibility for mono or stereo amplifier configurations. The pair handles 2400W maximum power combined for high-output car audio systems.
Ideal for Bass Enthusiasts Building High-SPL Systems
This twin-driver kit suits installers who want maximum cone area and the wiring options that dual voice coils provide. It is not for buyers who need a single subwoofer to save enclosure space or amplifier channels. It is also not for vehicles where 42.5 pounds of combined weight exceeds mounting capacity.
800W RMS Per Driver Decides Amplifier Matching
Each subwoofer delivers 800W RMS continuous power handling, so the amplifier must supply clean power at that level into a 4-ohm load per coil. The 45 Hz frequency response sets the low-end extension limit for sealed or ported enclosure tuning.
Highlights
- Deep bass driven by 800W RMS power handling
- Flexible amplifier matching through dual voice coil design
- Full low-frequency reproduction from 12-inch cone
- Engineered specifically for in-vehicle audio systems
- Durable build rated for 2400W max power handling
Specifications
| Brand | PRORECK |
|---|---|
| Type | Subwoofer |
| Subwoofer Size | 12 inches |
| Frequency Response | 45 hertz |
| Impedance | 4 ohm |
| Color | Black |
| Feature | Dual Voice Coil |
| Package Contain | Subwoofer Speaker |
Questions about this item
How do I wire the dual 4-ohm voice coils on the PRORECK 712D4x2 to my amplifier?
Each subwoofer has two 4-ohm coils; wire them in series for an 8-ohm load or in parallel for a 2-ohm load per sub, then combine the pair to match your amplifier’s stable impedance range.
What part of the PRORECK 712D4x2 will need attention after extended high-power use?
The dual voice coils and suspension are the primary wear items; prolonged 800W RMS operation can heat the former and fatigue the surround, eventually requiring reconing or driver replacement.
At what point does the PRORECK 712D4x2 hit its thermal limit during sustained playback?
Continuous operation at the rated 800W RMS will cause voice-coil temperature to rise until the thermal limit is reached, triggering power compression and protecting the windings from damage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PAC APH-TY02 Speaker Connection Harness Toyota Lexus 18
- Car Stereo Add-Ons
The Wires Zone Platinum 1/0 AWG Ring Terminals Pair
- Connector and Termi…



