We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of black 10-inch car subwoofers with dual voice coils

PRORECK

PRORECK 710 D2x2 10" Car Subwoofer 800W RMS 2400W Max Dual Voice Coil 2 Ohm

SKU CH-XF50-Y43AG

A pair of 10-inch dual-voice-coil subwoofers rated 800W RMS and 2400W peak for deep car bass

  • TypeSubwoofer
  • Subwoofer Size10 inches
  • Frequency Response49 hertz
  • Impedance2 ohm
  • ColorBlack
  • FeatureDual Voice Coil
  • Deep, hard-hitting bass from 2400W max power handling
  • Flexible amplifier wiring with dual 2-ohm voice coils
  • Rich low-frequency depth from 10-inch cone design
  • Engineered for optimal in-vehicle audio performance
  • Durable construction withstands continuous high-powered use

Dual 10-inch subwoofer pair for car audio

The PRORECK 710 D2x2 supplies two 10-inch passive subwoofers, each rated at 800W RMS with a 2400W maximum power handling figure. The dual voice coil design on each driver allows flexible wiring to match amplifier impedance requirements. The sealed or ported enclosures target a 49 Hz frequency response for deep low-frequency reproduction in vehicle cabins.

Replaces single-driver or lower-power subwoofers

Moving from a single 10-inch unit to this pair doubles cone area and RMS power capacity, which is worthwhile when the existing system lacks output authority or cannot be wired to the amplifier's optimal load. The dual voice coil topology solves impedance-matching issues that limit performance with single-coil drivers. Buyers who need a single compact enclosure or lower total power will not benefit from the added weight and space requirement.

Straightforward wiring

Each subwoofer presents a 2-ohm dual voice coil, so series or parallel wiring must be planned before installation to present the correct load to the amplifier. The 40.3-pound combined weight demands secure mounting hardware and adequate enclosure bracing. Common issues include incorrect coil wiring that halves or doubles the intended impedance, and insufficient amplifier current delivery at the resulting load.

Highlights

  • Deep, hard-hitting bass from 2400W max power handling
  • Flexible amplifier wiring with dual 2-ohm voice coils
  • Rich low-frequency depth from 10-inch cone design
  • Engineered for optimal in-vehicle audio performance
  • Durable construction withstands continuous high-powered use

Specifications

BrandPRORECK
TypeSubwoofer
Subwoofer Size10 inches
Frequency Response49 hertz
Impedance2 ohm
ColorBlack
FeatureDual Voice Coil
Package ContainSubwoofer Speaker

Questions about this item

What enclosure volume and depth does the 10-inch PRORECK 710 D2x2 require?

The 10-inch PRORECK 710 D2x2 is built for sealed or ported enclosures; follow the manufacturer's recommended box volume and ensure the mounting depth clears the magnet structure.

How do I wire the dual 2-ohm voice coils on the PRORECK 710 D2x2 to my amplifier?

Wire the dual 2-ohm coils in series for a 4-ohm load or in parallel for a 1-ohm load, matching the amplifier's stable impedance rating; secure all terminals before powering up.

When should I check the suspension and tinsel leads on the PRORECK 710 D2x2?

Inspect the surround, spider and tinsel leads every few months for fatigue or tears, especially after high-output sessions, and replace the driver if the cone motion becomes uneven.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.