We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10 inch car subwoofer with dual voice coil

PRORECK

PRORECK 410 10" Dual Voice Coil Car Subwoofer

SKU CH-9V44-A3DRR

A 10-inch dual voice coil car subwoofer delivering 400W RMS power and 41.5Hz-700Hz frequency response for deep bass

  • TypeCar Audio Subwoofers
  • Subwoofer Size10"
  • Voice CoilDual
  • Peak Power1200W
  • RMS Power400W
  • Frequency Response41.5Hz-700Hz
  • Deep bass from 41.5 Hz low-end response
  • Strong output with 1200 W peak power handling
  • Consistent performance at 400 W RMS rating
  • Flexible wiring via dual voice coil design
  • Efficient sound reproduction at 84.5 dB sensitivity

10-inch Dual Voice Coil Subwoofer

The PRORECK 410 is a 10-inch car subwoofer built around a dual voice coil design. It handles 400 watts RMS and 1200 watts peak power, with a frequency response of 41.5Hz to 700Hz and 84.5dB sensitivity. This component suits drivers who want deeper bass from a single enclosure.

Upgrade From Single Coil or Smaller Drivers

Replacing a single voice coil subwoofer with this dual coil model adds wiring flexibility for mono amplifiers. The jump is worth it when your current 8-inch or 10-inch driver cannot reach 41.5Hz or lacks the 400-watt RMS thermal capacity. It does not suit buyers who need more storage or builders who require a second card for stereo separation.

Standard Cutout Installation

Installation follows typical 10-inch cutout dimensions using the supplied mounting hardware. The dual voice coil terminals accept standard speaker wire and allow series or parallel wiring to match amplifier impedance. What usually goes wrong is mismatching the coil wiring to the amp load, which can trigger protection mode or reduce output.

Highlights

  • Deep bass from 41.5 Hz low-end response
  • Strong output with 1200 W peak power handling
  • Consistent performance at 400 W RMS rating
  • Flexible wiring via dual voice coil design
  • Efficient sound reproduction at 84.5 dB sensitivity

Specifications

BrandPRORECK
Series410
TypeCar Audio Subwoofers
Subwoofer Size10"
Voice CoilDual
Peak Power1200W
RMS Power400W
Frequency Response41.5Hz-700Hz
Sensitivity84.5

Questions about this item

What size enclosure is needed for a 10" dual voice coil subwoofer?

A 10" subwoofer requires a sealed or ported enclosure built to the manufacturer's recommended internal volume for that specific driver size.

How do I wire the dual voice coil on this PRORECK 410 subwoofer?

Wire the dual voice coils in series for an 8-ohm load or in parallel for a 2-ohm load to match your amplifier's stable impedance rating.

When should the surround on this 400W RMS subwoofer be inspected?

Inspect the foam or rubber surround annually for cracking or separation, especially after high-output use at the 400W RMS power level.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.