We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A black 10 inch car subwoofer with dual voice coil terminals

PRORECK

PRORECK 410 10" Car Subwoofer 1200W Peak 400W RMS Dual Voice Coil 4ohm

SKU CH-7XAJ-JF1H3

A 10-inch car subwoofer rated at 400 watts RMS with dual voice coils for flexible wiring

  • TypeCar Audio Subwoofers
  • Subwoofer Size10"
  • Voice CoilDual
  • Peak Power1200W
  • RMS Power400W
  • Frequency Response41.5Hz-700Hz

Impedance 4ohms

qty 1pair

  • 10-inch cone moves more air for deeper bass
  • 400 W RMS handles sustained output without distortion
  • Dual 4 Ω voice coils give wiring flexibility for amp matching
  • 5 Hz low-end reaches the bottom octave of music
  • 5 dB sensitivity produces high volume with modest amplifier power

10-Inch Dual Voice Coil Subwoofer

The PRORECK 410 is a 10-inch car subwoofer rated at 400W RMS and 1200W peak power. Its dual 4-ohm voice coils give installers wiring flexibility for mono or stereo amplifiers. The driver suits enthusiasts adding dedicated low-frequency output to a factory or aftermarket system. Frequency response spans 41.5Hz to 700Hz with 84.5dB sensitivity.

Sealed or Ported Enclosure Integration

This driver requires a correctly sized enclosure — sealed for tight bass or ported for higher output — and an amplifier able to deliver clean power near the 400W RMS rating. The dual voice coil topology lets you present a 2-ohm or 8-ohm load to match amplifier capabilities. Proper enclosure volume and tuning free the cone to reach the rated 41.5Hz low end without mechanical strain.

Upgrade from Single-Coil or Smaller Drivers

Builders replacing a single voice coil 10-inch unit gain wiring options and often better amplifier matching. The jump is worthwhile when the current subwoofer cannot handle 400W RMS or lacks the 41.5Hz extension needed for deep bass tracks. Systems already running a matched pair in a tuned box will hear less relative improvement.

Highlights

  • 10-inch cone moves more air for deeper bass
  • 400 W RMS handles sustained output without distortion
  • Dual 4 Ω voice coils give wiring flexibility for amp matching
  • 5 Hz low-end reaches the bottom octave of music
  • 5 dB sensitivity produces high volume with modest amplifier power

Specifications

BrandPRORECK
Series408
TypeCar Audio Subwoofers
Subwoofer Size10"
Voice CoilDual
Peak Power1200W
RMS Power400W
Frequency Response41.5Hz-700Hz
Sensitivity84.5

Other versions of this model

2 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much continuous power can the 10" subwoofer handle before thermal limits appear?

The driver is rated for 400 watts RMS, which is the sustained power level it can accept without overheating the dual voice coils.

What is the sensitivity and how much heat or noise should I expect during all-day playback?

At 84.5 dB sensitivity the subwoofer needs more amplifier power for a given volume, so the coils will run warmer during extended high-output use.

What amplifier wiring options does the dual 4-ohm voice coil require me to have ready?

The dual 4-ohm coils let you wire for a 2-ohm or 8-ohm load, so your amplifier must be stable at one of those impedances.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.