We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium projector ceiling mount with slotted plate and lateral shift coupling, sets projector five inches from ceiling

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct VIEWSONIC-Pro9500-SLOTTED projector accessory

SKU CH-75E8-NW79M

A ceiling mount built from 6061-T6 aircraft aluminium positions the ViewSonic PJL7211 Pro9500 about five inches down, rotates 360 degrees, and adds 1-1/2 inches of lateral lens shift

  • TypeProjector Mounts
  • Aircraft-grade 6061-T6 aluminium ensures long-term durability
  • 360-degree rotation plus pitch and roll for flexible aiming
  • 5-inch lateral shift centres the lens on off-centre mounts
  • Fixed 5-inch drop positions the projector close to the ceiling
  • CNC-machined plate fits ViewSonic PJL7211 and Pro9500 models only

VIEWSONIC Pro9500 Ceiling Mount

This aluminium ceiling mount is designed exclusively for the ViewSonic PJL7211 Pro9500 projector. It positions the unit approximately 5 inches from the ceiling and provides a secure, model-specific fit. The CNC-machined plate uses 6061-T6 aircraft-grade aluminium for long-term rigidity. All required mounting hardware and instructions are supplied.

Lateral Shift Coupling Upgrade

The mount includes a Lateral Shift Coupling that adds 1-1/2 inches of left-right adjustment to centre the lens. This replaces fixed-position brackets that cannot compensate for off-centre ceiling joists or screen alignment. The jump is worth it when the mounting surface cannot be centred above the screen. The coupling also allows full 360-degree rotation plus pitch and roll movement.

Build Integration Constraints

The plate covers minimal projector surface area, leaving ventilation paths clear for heat escape. It is not intended for drop or false ceilings, so a solid structural anchor point is required. The fixed 5-inch extension cannot be shortened or lengthened, limiting use in very low ceiling voids. Buyers needing a shorter drop or a universal plate for other models should look elsewhere.

Highlights

  • Aircraft-grade 6061-T6 aluminium ensures long-term durability
  • 360-degree rotation plus pitch and roll for flexible aiming
  • 5-inch lateral shift centres the lens on off-centre mounts
  • Fixed 5-inch drop positions the projector close to the ceiling
  • CNC-machined plate fits ViewSonic PJL7211 and Pro9500 models only

Specifications

TypeProjector Mounts

Questions about this item

What ceiling clearance does the 5-inch drop of the VIEWSONIC-Pro9500-SLOTTED mount require?

The mount positions the projector roughly 5 inches below the ceiling surface, so you need at least that much clear vertical space plus the projector's own height.

Which step is most often missed when installing the slotted plate and lateral shift coupling?

Align the CNC-machined plate to the PJL7211 Pro9500 mounting holes first, then use the 1-1/2 inch lateral shift to centre the lens before tightening all hardware.

Will the 6061-T6 aluminum plate or lateral coupling need periodic replacement?

The aircraft-grade aluminum construction is built to last; no scheduled replacement of the plate or coupling is required under normal use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.