Projector Ceiling Mounts Direct, LLC.
Projector Ceiling Mounts Direct VIEWSONIC-Pro9500-LAT-13 projector accessory
Aircraft-grade aluminium ceiling mount with 360° rotation and 13–20 inch telescoping extension, custom-fit for ViewSonic PJL7211 and Pro9500 projectors
- TypeProjector Mounts
- Aircraft-grade 6061-T6 aluminum ensures lasting strength
- Telescoping extension positions projector 13 to 20 inches from ceiling
- 360-degree rotation plus pitch and roll for precise aiming
- Lateral shift coupling gives 1-1/2 inches of side-to-side lens centering
- Custom CNC-machined plate fits ViewSonic PJL7211 Pro9500 models only
Precision Ceiling Mount for ViewSonic PJL7211
This projector ceiling mount is engineered specifically for the ViewSonic PJL7211 Pro9500 series. It uses 100% 6061-T6 aircraft-grade aluminium with a CNC-machined plate for exact fitment. The design allows full 360-degree rotation plus pitch and roll adjustment for precise image alignment. All required mounting hardware and detailed instructions are included for straightforward installation.
Installers Needing Lateral Lens Shift
The integrated Lateral Shift Coupling provides 1-1/2 inches of left/right adjustment to centre the projector lens when the ceiling mounting point is off-axis. This suits rooms where structural joists or existing wiring prevent a perfectly centred installation. It is not designed for drop or false ceilings, so installers working with suspended grid systems should seek an alternative solution. The mount only fits the projector models explicitly listed.
Telescoping Extension and Hardware Kit
The package supplies every bolt, spacer and fixing needed to complete the job without extra trips to the hardware store. A telescoping column sets the projector between 13 and 20 inches from the ceiling in one-inch increments, letting you fine-tune throw distance on site. The CNC plate minimises projector coverage to preserve ventilation paths, while the lateral shift mechanism eliminates the need for custom brackets or shims.
Highlights
- Aircraft-grade 6061-T6 aluminum ensures lasting strength
- Telescoping extension positions projector 13 to 20 inches from ceiling
- 360-degree rotation plus pitch and roll for precise aiming
- Lateral shift coupling gives 1-1/2 inches of side-to-side lens centering
- Custom CNC-machined plate fits ViewSonic PJL7211 Pro9500 models only
Specifications
| Type | Projector Mounts |
|---|
Questions about this item
Which ViewSonic projector models does this mount support?
The mount is built for the ViewSonic PJL7211 Pro9500 models listed in the title.
How much can the lateral shift coupling move the projector sideways?
The lateral shift coupling provides 1-1/2 inches of left/right adjustment to centre the lens.
How do I confirm the mount is holding the projector at the correct distance after installation?
Check that the telescoping extension shows the projector sitting 13 to 20 inches from the ceiling in 1-inch increments.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
