We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount with adjustable swivel arm and projector plate

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct VIEWSONIC-PJD5122 Projector Accessory

SKU CH-F7SA-SSGKQ

Ceiling mount positions compatible ViewSonic projectors 4 inches down with 360-degree swivel and ±35-degree tilt

  • TypeProjector Mounts
  • Secure installation with CNC-machined 6061-T6 aluminium plate
  • Full positioning freedom via 360-degree swivel and ±35° tilt/roll
  • Quick setup with all hardware and detailed instructions included
  • Low-profile design places projector approximately 4 inches from ceiling
  • Precision fit for ViewSonic PJD5122, PJD5152, PJD5211, PJD5221, PJD5231 models

Dedicated Mount for Five ViewSonic Models

This ceiling mount is engineered specifically for the ViewSonic PJD5122, PJD5152, PJD5211, PJD5221 and PJD5231 projectors. It replaces universal brackets with a custom CNC-machined 6061-T6 aluminium plate that matches the exact mounting points of each unit. Installers receive every screw and bolt required for wood or drywall ceilings plus illustrated instructions. The projector itself is not included.

Sustained Orientation Stability

Once secured, the arm holds the projector roughly four inches below the ceiling surface. A 360 degree swivel joint combines with independent pitch and roll adjustments of up to 35 degrees in any direction. The rigid aluminium plate prevents gradual drift caused by vibration or thermal cycling, so the image geometry stays aligned through long presentation sessions or permanent installations.

Model-Specific Compatibility Constraint

The mounting plate will only fit the five projector models listed above; other ViewSonic or third-party units cannot be attached. Buyers with a different projector must select a different mount. The product is not designed for suspended or false-ceiling grids.

Highlights

  • Secure installation with CNC-machined 6061-T6 aluminium plate
  • Full positioning freedom via 360-degree swivel and ±35° tilt/roll
  • Quick setup with all hardware and detailed instructions included
  • Low-profile design places projector approximately 4 inches from ceiling
  • Precision fit for ViewSonic PJD5122, PJD5152, PJD5211, PJD5221, PJD5231 models

Specifications

TypeProjector Mounts

Questions about this item

Does the 360-degree swivel and ±35-degree pitch create any vibration or noise after hours of projector heat?

The mount is a passive aluminium bracket with no moving parts once tightened, so it adds no fan noise, coil whine or thermal rattle during extended use.

What must I already have on the ceiling for the included hardware to anchor securely?

The kit supplies lag bolts for wood beams and anchors for drywall; you need either exposed joists or a solid drywall ceiling — it is not designed for suspended-grid tiles.

Will the 4-inch drop leave enough airflow clearance for my ViewSonic PJD5122’s rear exhaust?

Yes, the plate is CNC-cut for the PJD5122, PJD5152, PJD5211, PJD5221 and PJD5231 models, keeping vent paths open while holding the projector roughly 4 inches below the ceiling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.