We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
CNC-machined aluminium projector ceiling mount with 360-degree swivel and +/-35-degree tilt, silver finish, shown without projector

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct SANYO-PLC-XU3001 Projector Accessory

SKU CH-Y08X-SY3W9

Ceiling mount positions a Sanyo PLC-XU3001 projector about four inches down with 360-degree swivel and ±35-degree tilt on a CNC-machined 6061-T6 aluminium plate.

  • TypeProjector Mounts
  • Designed for Sanyo PLC-XU3001 ensuring precise fit
  • CNC-machined 6061-T6 aluminium plate built to last
  • 360-degree swivel with ±35° tilt for flexible aiming
  • Sets projector ~4 inches from ceiling for low profile
  • All hardware and detailed instructions included for quick install

Projector Ceiling Mount for Sanyo PLC-XU3001

This ceiling mount is built specifically for the Sanyo PLC-XU3001 projector. It positions the unit roughly four inches below the ceiling surface. The design uses a CNC-machined 6061-T6 aluminium plate for a precise fit. It is intended for drywall or wooden beam installations only.

Included Hardware and Adjustment Range

All mounting hardware and detailed instructions come in the box for a straightforward installation. The mount provides a full 360-degree swivel plus pitch and roll adjustment up to 35 degrees in any direction. This allows precise image alignment without moving the ceiling bracket. The plate covers minimal projector surface area to preserve ventilation.

Fixed Drop Length and Compatibility Limits

The extension length is fixed at approximately four inches, so it cannot accommodate higher ceilings or drop-ceiling grids. The custom plate fits only the Sanyo PLC-XU3001 model listed in the title. Builders needing adjustable drop lengths or a universal plate for other projectors will need a different mounting solution.

Highlights

  • Designed for Sanyo PLC-XU3001 ensuring precise fit
  • CNC-machined 6061-T6 aluminium plate built to last
  • 360-degree swivel with ±35° tilt for flexible aiming
  • Sets projector ~4 inches from ceiling for low profile
  • All hardware and detailed instructions included for quick install

Specifications

TypeProjector Mounts

Questions about this item

Will the CNC-machined 6061-T6 aluminium mounting plate need any maintenance or replacement over time?

The 6061-T6 aircraft-grade aluminium plate is built to last and requires no scheduled maintenance or replacement under normal indoor use.

What is the maximum tilt angle before the mount hits its mechanical stop during all-day operation?

The mount allows pitch and roll adjustment up to ±35 degrees; beyond that the joint reaches its limit and cannot tilt further.

Does the mount generate any noise or heat when the projector runs continuously all day?

The mount itself has no moving parts or electronics, so it produces no noise or heat; it simply holds the projector about 4 inches from the ceiling for airflow.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.