We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount with adjustable arm and projector plate for Sanyo PLC-XC50 series

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct SANYO-PLC-XC50-SLOTTED Projector Accessory

SKU CH-9BCH-94T2C

Aircraft-grade aluminium mount positions compatible Sanyo projectors five inches from the ceiling with 360-degree rotation and lateral lens shift

  • TypeProjector Mounts
  • Aircraft-grade 6061-T6 aluminium ensures lasting durability
  • 360-degree rotation plus pitch and roll for flexible aiming
  • 1-1/2 inch lateral shift centres the lens precisely
  • CNC-machined plate fits PLC-XC50, PLC-XC50A, PLC-XC55, PLC-XC56 only
  • Sets projector about 5 inches from the ceiling

Sanyo PLC-XC50 Series Ceiling Mount

This projector mount is engineered specifically for Sanyo PLC-XC50, PLC-XC50A, PLC-XC55 and PLC-XC56 models. It replaces universal brackets with a CNC-machined plate that matches the chassis exactly, leaving ventilation paths clear. Installers who need a dedicated fit for these four projectors will find the alignment precise and the hardware complete. Buyers with any other projector model cannot use this mount.

Thermal Clearance and 360° Orientation

The design positions the unit roughly 5 inches from the ceiling surface, creating a gap that lets exhaust heat rise without recirculation. The coupling rotates a full 360 degrees and allows pitch and roll adjustment in any direction. A lateral shift coupling provides 1-1/2 inches of side-to-side travel to centre the lens when the mounting point is off-axis. The mount is not intended for drop or false ceilings.

6061-T6 Aluminium Build and Included Hardware

Every structural part is machined from 6061-T6 aircraft-grade aluminium for rigidity without excess weight. The package contains all screws, bolts and washers required for assembly, plus detailed instructions that walk through the installation step by step. No additional parts or specialised tools are needed to complete the job. The plate you receive may look different from product photos but will fit the listed projectors.

Highlights

  • Aircraft-grade 6061-T6 aluminium ensures lasting durability
  • 360-degree rotation plus pitch and roll for flexible aiming
  • 1-1/2 inch lateral shift centres the lens precisely
  • CNC-machined plate fits PLC-XC50, PLC-XC50A, PLC-XC55, PLC-XC56 only
  • Sets projector about 5 inches from the ceiling

Specifications

TypeProjector Mounts

Questions about this item

How do I attach the mount to the Sanyo PLC-XC50 and what step is often missed?

Bolt the CNC-machined plate to the projector using the included hardware, then secure the arm to a structural ceiling joist — the step people skip is verifying the joist can hold the load before drilling.

What part of this mount will need checking or replacement over time?

The 360-degree rotation joint and lateral shift coupling should be inspected periodically for loosening; re-torque the aluminum fasteners if any play develops.

What is the minimum distance the projector sits from the ceiling with this mount?

The fixed extension positions the projector approximately 5 inches from the ceiling surface, so lower ceilings may not leave enough clearance for cables or ventilation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.