We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount plate with adjustable arms, sets projector five inches from ceiling

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct SANYO-PLC-XC50-MM projector accessory for PLC-XC50 PLC-XC50A PLC-XC55 PLC-XC56

SKU CH-14NJ-P6F9K

Ceiling mount for Sanyo PLC-XC50 PLC-XC50A PLC-XC55 PLC-XC56 sets the projector five inches down with 360-degree rotation and 80-degree tilt

  • TypeProjector Mounts
  • Designed for Sanyo PLC-XC50, PLC-XC50A, PLC-XC55 and PLC-XC56 models
  • CNC-machined 6061-T6 aircraft aluminium plate ensures precise fit and heat clearance
  • 360-degree rotation with ±80-degree tilt for flexible positioning
  • Sets projector approximately 5 inches from ceiling on drywall or wooden beam
  • All mounting hardware and detailed instructions included for quick installation

Sanyo PLC-XC50 series ceiling mount

This ceiling mount is built for Sanyo PLC-XC50, PLC-XC50A, PLC-XC55 and PLC-XC56 projectors. It positions the unit roughly five inches from the ceiling using 6061-T6 aircraft aluminium construction. The CNC-machined plate matches the listed models only, leaving room for heat to escape. Projector not included.

Installation on drywall or wooden beam

All required hardware and step-by-step instructions come in the box for a straightforward fit. The mount rotates 360 degrees and tilts up to 80 degrees in any direction. It is not designed for drop or false ceilings. The actual plate may look different from product photos but will fit the specified projectors.

Fixed five-inch drop and model-specific fit

The bracket holds the projector at a set distance of about five inches from the ceiling surface. It suits rooms where that clearance works and the projector model matches the list exactly. Buyers needing adjustable extension length or a universal plate for other models cannot use this mount.

Highlights

  • Designed for Sanyo PLC-XC50, PLC-XC50A, PLC-XC55 and PLC-XC56 models
  • CNC-machined 6061-T6 aircraft aluminium plate ensures precise fit and heat clearance
  • 360-degree rotation with ±80-degree tilt for flexible positioning
  • Sets projector approximately 5 inches from ceiling on drywall or wooden beam
  • All mounting hardware and detailed instructions included for quick installation

Specifications

TypeProjector Mounts

Questions about this item

How do I confirm the mount is holding the projector securely after I install it?

The CNC-machined 6061-T6 aluminium plate is made for the Sanyo PLC-XC50, PLC-XC50A, PLC-XC55 and PLC-XC56 only; once the four projector bolts are tight the unit should sit rigid with no wobble and the projector vents must remain clear for heat to escape.

What hardware comes in the box and is anything else required for a drywall ceiling?

All projector bolts, ceiling lag bolts, anchors and a detailed instruction sheet are included; you only need a drill, a 50 mm drill bit for the anchors and basic hand tools.

Which version should I pick if I own a PLC-XC55 versus a PLC-XC56?

This single mount fits both the PLC-XC55 and PLC-XC56 along with the PLC-XC50 and PLC-XC50A, so no separate version is needed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.