Projector Ceiling Mounts Direct, LLC.
Projector Ceiling Mounts Direct OPTOMA-ZH420UST-LAT-13 projector accessory
Aircraft-aluminium ceiling mount with 360° rotation and 13–20 inch telescoping extension for Optoma ultra-short-throw projectors
- TypeProjector Mounts
- Aircraft-grade 6061-T6 aluminium ensures rigid, lasting support
- Telescoping extension positions projector 13 to 20 inches from ceiling
- 360-degree rotation plus pitch and roll allows precise image alignment
- Lateral shift coupling centres lens when ceiling mount is off-centre
- Custom CNC-machined plate fits listed Optoma models only
Compatible Optoma UST Models
This ceiling mount is engineered specifically for the Optoma EH340UST, W340UST, ZH420UST-B and ZH420UST-W ultra-short-throw projectors. The CNC-machined mounting plate ensures a precise fit using minimal projector coverage, leaving adequate space for heat to escape during operation. Installers who need a dedicated bracket for these exact models will find the hardware and instructions included for a straightforward setup. Buyers with different projector makes or models cannot use this mount.
Telescoping Extension Range
The telescoping arm positions the projector approximately 13 to 20 inches from the ceiling in one-inch increments, allowing fine depth adjustment for the installation. A 360-degree rotation joint combined with pitch and roll movement lets the installer align the image precisely without moving the ceiling anchor. The lateral shift coupling provides 1-1/2 inches of left/right travel to centre the lens when the mounting surface is off-centre. This mount is not intended for drop or false ceilings.
Aircraft-Grade Aluminium Build
The entire structure is machined from 100% 6061-T6 aircraft aluminium for rigid, long-term durability under continuous use. The custom plate design covers only the necessary mounting points, maximising airflow around the projector chassis. Actual plate geometry may differ from product images but is guaranteed to fit only the listed Optoma models. Installers requiring a universal bracket or a solution for suspended ceiling grids must look elsewhere.
Highlights
- Aircraft-grade 6061-T6 aluminium ensures rigid, lasting support
- Telescoping extension positions projector 13 to 20 inches from ceiling
- 360-degree rotation plus pitch and roll allows precise image alignment
- Lateral shift coupling centres lens when ceiling mount is off-centre
- Custom CNC-machined plate fits listed Optoma models only
Specifications
| Type | Projector Mounts |
|---|
Questions about this item
How do I install the OPTOMA-ZH420UST-LAT-13 mount and what is the common mistake?
Attach the CNC-machined plate to the Optoma ZH420UST, secure the telescopic column to a structural ceiling joist, then rotate the 360-degree ball joint for aim. The step often missed is using the 1-1/2 inch lateral shift coupling to centre the lens when the joist is off-centre.
What maintenance or replacement will this mount need over time?
The 6061-T6 aluminium construction and included hardware are rated for the projector's service life. No lubrication or periodic part replacement is required; only re-check bolt torque if the ceiling structure settles or vibrates.
What physical limit appears first when the projector runs continuously on this mount?
The mount holds the Optoma ZH420UST 13 to 20 inches from the ceiling in 1-inch steps. The earliest constraint is the fixed 20-inch maximum drop, which may limit airflow clearance in rooms with very high ceilings.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



