We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount with 10 inch extension arm and adjustable projector plate

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct OPTOMA-ML330-MM-10EXT projector accessory

SKU CH-7R3D-44NQG

Ceiling mount holds Optoma LH150, LH160, LH200, ML330, ML1050ST+ and ML750ST projectors 10 inches down with 360-degree rotation and 80-degree tilt

  • TypeProjector Mounts
  • Designed for Optoma LH150 LH160 LH200 ML330 ML1050ST+ ML750ST
  • 100% 6061-T6 aircraft aluminium construction for lasting strength
  • 360-degree rotation plus ±80° tilt for flexible aiming
  • All hardware and detailed instructions included for quick setup
  • 10-inch extension positions projector away from ceiling

Compatible Projector Models

This ceiling mount fits Optoma LH150, LH160, LH200, ML330, ML1050ST+ and ML750ST projectors only. The CNC-machined plate is made from 100 percent 6061-T6 aircraft aluminium for a precise fit. It positions the projector approximately 10 inches from the ceiling on a fixed extension. Projector is not included.

Installation Requirements

All necessary hardware and detailed instructions are supplied for drywall or wooden-beam ceilings. The mount rotates 360 degrees and tilts up to +/- 80 degrees for flexible aiming. It is not intended for drop or false ceilings, so verify your ceiling type before starting. The actual plate may look different from product images but will match the listed models.

Sustained Operation Design

The minimal-coverage plate leaves space around the projector for heat to escape during extended use. Aircraft-grade aluminium construction resists sagging or loosening over time. Fixed 10-inch extension keeps the projector at a consistent distance from the ceiling surface. No moving parts require adjustment once the mount is locked in position.

Highlights

  • Designed for Optoma LH150 LH160 LH200 ML330 ML1050ST+ ML750ST
  • 100% 6061-T6 aircraft aluminium construction for lasting strength
  • 360-degree rotation plus ±80° tilt for flexible aiming
  • All hardware and detailed instructions included for quick setup
  • 10-inch extension positions projector away from ceiling

Specifications

TypeProjector Mounts

Questions about this item

How can I verify the mount holds the projector at the correct 10-inch drop after installation?

Measure from the ceiling surface to the projector base; the mount is designed to position it approximately 10 inches away.

What hardware comes in the box and is anything else required for a drywall or wooden-beam ceiling?

All necessary mounting hardware for drywall or wooden-beam installation is included along with detailed instructions; no extra parts are needed.

My projector is an Optoma ML330 — does this specific model plate fit it or do I need a different version?

The mount is built for the Optoma LH150 LH160 LH200 ML330 ML1050ST+ ML750ST models only, so the ML330 is directly supported.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.