We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount plate with adjustable swivel arm, shown without projector

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct OPTOMA-HD28DSE Projector Accessory

SKU CH-FGQN-RY041

Ceiling mount positions compatible Optoma projectors four inches down with 360-degree swivel and ±35-degree tilt

  • TypeProjector Mounts
  • CNC-machined 6061-T6 aluminium plate ensures precise, durable fit
  • 360-degree swivel with ±35° tilt lets you aim the image perfectly
  • Included hardware and clear instructions make installation quick
  • Mount positions projector roughly 4 inches from ceiling for heat clearance
  • Custom design fits Optoma HD28DSE, S310e, S312, S315, S316, W300, W310, W312 only

Compatible Optoma Projector Models

This ceiling mount fits the Optoma HD28DSE, S310e, S312, S315, S316, W300, W310 and W312 projectors. It is built for installers who need a model-specific bracket rather than a universal kit. The CNC-machined 6061-T6 aluminium plate matches the mounting points on these units exactly. Projector not included.

Installation and Common Issues

All hardware and detailed instructions are supplied for fitting to a drywall ceiling or wooden beam. The plate swivels 360 degrees and tilts plus or minus 35 degrees for precise image alignment. The mount positions the projector roughly 4 inches from the ceiling surface. It is not designed for drop or false ceilings, so verify your ceiling type before starting.

Pre-Purchase Checks

Confirm your projector model appears in the compatible list above; the plate will not fit other models even if they look similar. Ensure you have a solid drywall or wooden beam structure for anchoring. The fixed 4-inch drop cannot be adjusted, so check that the resulting projector height suits your room layout. The actual plate you receive may differ from product images.

Highlights

  • CNC-machined 6061-T6 aluminium plate ensures precise, durable fit
  • 360-degree swivel with ±35° tilt lets you aim the image perfectly
  • Included hardware and clear instructions make installation quick
  • Mount positions projector roughly 4 inches from ceiling for heat clearance
  • Custom design fits Optoma HD28DSE, S310e, S312, S315, S316, W300, W310, W312 only

Specifications

TypeProjector Mounts

Questions about this item

How can I verify the mount is holding the Optoma HD28DSE securely after installation?

The CNC-machined 6061-T6 aluminium plate fits the listed models precisely, the 360-degree swivel locks at the chosen angle and the +/- 35-degree pitch and roll adjustments stay fixed once tightened, so the projector sits level and stable about four inches from the ceiling.

What hardware comes in the box and do I need anything else for a drywall ceiling?

All mounting hardware for drywall or wooden-beam ceilings plus the projector-specific plate and detailed instructions are included; no extra parts are required for those surfaces, but the mount is not intended for drop or false ceilings.

My projector is an Optoma W310 — is this the correct version?

Yes, the W310 is explicitly listed among the compatible models HD28DSE, S310e, S312, S315, S316, W300, W310 and W312, so this mount will fit that unit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.