We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium projector ceiling mount with telescoping 13 to 20 inch extension arm

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct NEC-ME401W-LAT-13 projector accessory 13-20 inch extension

SKU CH-2M8P-223YZ

Telescoping ceiling mount positions NEC ME401W or ME401X projectors 13 to 20 inches down with 360-degree rotation and lateral shift adjustment

  • TypeProjector Mounts
  • Telescoping extension positions projector 13 to 20 inches from ceiling in 1 inch increments
  • 100% aircraft-grade 6061-T6 aluminum construction ensures durable, long-lasting mounting
  • 360-degree rotation plus pitch and roll adjustment enables flexible projector aiming
  • Lateral shift coupling provides 1-1/2 inches of left/right lens centering for off-centre installations
  • CNC-machined mounting plate designed specifically for NEC ME401W and ME401X projectors

NEC ME401W & ME401X Ceiling Mount

This aluminium ceiling mount is built specifically for NEC ME401W and ME401X projectors. It provides a dedicated fit that leaves ventilation space clear and uses minimal coverage on the projector body. The package includes all required hardware and detailed instructions for a quick installation. The CNC-machined plate ensures precise alignment with the mounting points on these two models only.

13-20 Inch Telescoping Extension with 360 Rotation

The mount telescopes in one-inch increments to position the projector 13 to 20 inches from the ceiling. A 360-degree rotating coupling allows full yaw adjustment, while pitch and roll can be set in any direction. A lateral shift coupling adds 1-1/2 inches of side-to-side travel to centre the lens when the ceiling mounting point is off-centre. The fixed-length design is not intended for drop or false ceiling installations.

6061-T6 Aircraft Aluminium Construction Check

Verify that your projector is an NEC ME401W or ME401X before ordering; the mount will not fit other models. Confirm the ceiling structure can accept a solid mount, as this unit is not designed for suspended or false ceiling grids. Ensure the 13 to 20 inch drop range suits the room height and screen geometry. The supplied plate may look different from product images but will match the listed projectors.

Highlights

  • Telescoping extension positions projector 13 to 20 inches from ceiling in 1 inch increments
  • 100% aircraft-grade 6061-T6 aluminum construction ensures durable, long-lasting mounting
  • 360-degree rotation plus pitch and roll adjustment enables flexible projector aiming
  • Lateral shift coupling provides 1-1/2 inches of left/right lens centering for off-centre installations
  • CNC-machined mounting plate designed specifically for NEC ME401W and ME401X projectors

Specifications

TypeProjector Mounts

Questions about this item

Does the aluminium construction add any noticeable heat or vibration when the projector runs all day?

The mount is made from 6061-T6 aircraft-grade aluminium and is designed to leave adequate space for heat to escape, so it does not trap heat or introduce vibration.

What must I already own for this mount to work?

You need an NEC ME401W or ME401X projector and a solid ceiling structure, because the mount is not intended for drop or false ceilings.

Will this extension interfere with an older NEC ME401W I already have?

The mount is built specifically for the NEC ME401W and ME401X, so it fits your existing projector and positions it 13 to 20 inches from the ceiling with 1-1/2 inches of lateral shift.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.