We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aircraft aluminium projector ceiling mount with slotted plate, sets projector five inches from ceiling

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. VIEWSONIC-X1-SLOTTED projector accessory

SKU CH-1R8Y-R80TX

Ceiling mount positions compatible ViewSonic projectors five inches down with 360-degree rotation, pitch and roll plus 1.5-inch lateral shift.

  • TypeProjector Mounts
  • Compatible with ViewSonic X1, X1-4K, X2, X2-4K models
  • 360-degree rotation with pitch and roll adjustment
  • 5-inch lateral shift centers lens off-centre
  • 6061-T6 aircraft aluminium construction for durability
  • Sets projector approximately 5 inches from ceiling

Projector Mount for ViewSonic X1 Series

This ceiling mount is designed exclusively for ViewSonic X1, X1-4K, X2 and X2-4K projectors. It uses a CNC-machined plate made from 6061-T6 aircraft aluminium to ensure a precise fit. The mount is built for permanent installation on solid ceilings and is not intended for drop or false ceiling tiles. All necessary hardware and detailed instructions are included for a straightforward setup.

Rotation and Lateral Adjustment Limits

The mount provides full 360-degree rotation plus pitch and roll movement in any direction. A Lateral Shift Coupling adds 1-1/2 inches of left or right travel to centre the lens when the ceiling anchor is off-centre. The fixed extension positions the projector roughly 5 inches from the ceiling surface, which also leaves space for heat to escape. No drop-ceiling compatibility is offered.

Verify Projector Model and Ceiling Type

Confirm that your exact projector model appears in the compatible list before ordering, because the plate will only fit those units. The mounting plate you receive may look different from product images but will match the listed models. Ensure you are attaching to a solid structural ceiling, as this mount is not rated for suspended or false ceiling grids. Projector not included.

Highlights

  • Compatible with ViewSonic X1, X1-4K, X2, X2-4K models
  • 360-degree rotation with pitch and roll adjustment
  • 5-inch lateral shift centers lens off-centre
  • 6061-T6 aircraft aluminium construction for durability
  • Sets projector approximately 5 inches from ceiling

Specifications

TypeProjector Mounts

Questions about this item

How do I know this mount will fit my ViewSonic X1-4K?

The CNC-machined plate is made for the X1, X1-4K, X2 and X2-4K models only, so the bolt pattern and clearance match those projectors exactly.

What does the 360-degree rotation mean for image alignment?

You can spin the projector a full 360 degrees and tilt it in any direction, letting you square the image to the screen without moving the ceiling bracket.

How does the 1-1/2 inch lateral shift coupling help when the ceiling joist is off-centre?

It slides the projector left or right up to one and a half inches, centring the lens on the screen without re-drilling the mount.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.