We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount with telescoping pole and projector plate for ViewSonic PX703HD PX727HD

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. VIEWSONIC-PX703HD-LAT-13 projector accessory

SKU CH-9D70-0YA17

Ceiling mount for ViewSonic PX703HD and PX727HD projectors, adjustable 13 to 20 inches with 360-degree rotation and lateral shift

  • TypeProjector Mounts
  • Compatible with ViewSonic PX703HD and PX727HD models
  • Telescoping extension adjusts 13 to 20 inches from ceiling in 1 inch steps
  • 360-degree rotation plus pitch and roll for flexible positioning
  • 100% 6061-T6 aircraft aluminum construction for durability
  • Lateral shift coupling provides 1-1/2 inches of left-right lens centering

Ceiling Mount for ViewSonic PX703HD and PX727HD

This projector mount is built specifically for the ViewSonic PX703HD and PX727HD models. It uses a CNC-machined plate made from 6061-T6 aircraft aluminium to ensure a precise fit. The design minimises coverage of the projector body to allow heat to escape freely. Installers who need a dedicated, model-specific mounting solution will find this unit matches the hardware exactly.

Thermals Noise and Power Draw

The open mounting plate leaves adequate space around the projector vents so hot air can dissipate without obstruction. Because the accessory has no moving parts, fans or electronics, it adds zero operational noise and draws no power. The 6061-T6 aluminium construction handles the projector weight steadily without flex that could misalign the lens over time.

Lateral Shift and Telescoping Extension

A lateral shift coupling provides 1-1/2 inches of left-right adjustment to centre the lens when the ceiling joist is off-axis from the screen. The telescoping extension sets the projector between 13 and 20 inches from the ceiling in 1 inch increments. All necessary mounting hardware and detailed instructions are included for a straightforward installation on solid ceilings.

Highlights

  • Compatible with ViewSonic PX703HD and PX727HD models
  • Telescoping extension adjusts 13 to 20 inches from ceiling in 1 inch steps
  • 360-degree rotation plus pitch and roll for flexible positioning
  • 100% 6061-T6 aircraft aluminum construction for durability
  • Lateral shift coupling provides 1-1/2 inches of left-right lens centering

Specifications

TypeProjector Mounts

Questions about this item

How do I install the VIEWSONIC-PX703HD-LAT-13 mount and what step do people often miss?

Attach the CNC-machined 6061-T6 aluminum plate to your ViewSonic PX703HD or PX727HD using the included hardware, then secure the telescoping arm to a structural ceiling joist — not a drop ceiling — and use the 1-1/2 inch lateral shift coupling to centre the lens before tightening.

What maintenance or replacement will this projector mount need over time?

The 6061-T6 aircraft aluminum construction resists corrosion, so no scheduled replacement is required; periodically check that all bolts remain tight and that the telescoping extension slides cleanly through its 13 to 20 inch range.

What is the first limit I will hit when using this mount continuously?

The telescoping extension stops at 20 inches from the ceiling, and the lateral shift coupling provides only 1-1/2 inches of side-to-side adjustment, so those mechanical ranges are the hard limits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.