We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium projector ceiling mount with slotted plate and adjustable coupling, sets projector five inches from ceiling

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. VIEWSONIC-PLED-W500-SLOTTED projector accessory

SKU CH-HZ05-XRAGV

Ceiling mount secures ViewSonic PLED-W500 projectors with 6061-T6 aircraft aluminium, 360-degree rotation, pitch and roll adjustment, and 1-1/2 inch lateral shift for lens centring.

  • TypeProjector Mounts
  • CNC-machined 6061-T6 aircraft aluminium ensures durable mounting
  • 360° rotation plus pitch and roll gives full aiming freedom
  • 1-1/2 inch lateral shift centres lens on off-centre ceilings
  • Fixed 5 inch drop positions projector close to ceiling
  • Custom plate fits ViewSonic PLED-W500 models only

Projector Mount for ViewSonic PLED-W500

This ceiling mount is engineered specifically for the ViewSonic PLED-W500 projector. It provides a secure, model-specific attachment that ensures proper weight distribution and leaves adequate space for heat dissipation. The design uses minimal projector coverage to maintain ventilation. It is intended for permanent installation on solid ceilings.

360-Degree Rotation and Lateral Shift Adjustment

The mount rotates a full 360 degrees and offers pitch and roll movement for precise image alignment. A lateral shift coupling provides 1-1/2 inches of left and right adjustment to centre the lens when the mounting surface is off-centre. The unit positions the projector approximately 5 inches from the ceiling. It is not designed for drop or false ceiling installations.

6061-T6 Aircraft Aluminium Construction

The mounting plate is CNC machined from 100% 6061-T6 aircraft grade aluminium for structural rigidity and durability. All necessary installation hardware and detailed instructions are included in the package. The actual plate design may differ from product images but will only fit the projector models listed in the title. The projector itself is not included.

Highlights

  • CNC-machined 6061-T6 aircraft aluminium ensures durable mounting
  • 360° rotation plus pitch and roll gives full aiming freedom
  • 1-1/2 inch lateral shift centres lens on off-centre ceilings
  • Fixed 5 inch drop positions projector close to ceiling
  • Custom plate fits ViewSonic PLED-W500 models only

Specifications

TypeProjector Mounts

Questions about this item

How do I attach the CNC-machined 6061-T6 plate to my ViewSonic PLED-W500, and what step do people miss?

Use the included hardware to bolt the plate to the projector's bottom mounting points, then lock the lateral-shift coupling; the step often missed is centring the lens with the 1-1/2 inch left/right adjustment before tightening.

What part of this mount will need checking or replacement after long-term ceiling installation?

Inspect the 360-degree rotation joints and pitch/roll locking screws periodically; the aircraft-aluminium plate itself does not wear, but the moving couplings can loosen over time.

What clearance limit appears first when the projector runs continuously in this fixed 5-inch drop position?

The 5-inch ceiling gap is the primary constraint — it limits heat-escape space, so sustained use depends on the projector's own thermal design rather than the mount.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.