We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount plate with adjustable swivel arm, shown without projector

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. VIEWSONIC-PJD6552LW Projector Accessory

SKU CH-XZAJ-ADVCM

A ceiling mount designed for specific ViewSonic projectors, offering 360-degree rotation and +/- 35-degree tilt with a 4-inch drop

  • TypeProjector Mounts
  • Precise fit for listed ViewSonic models
  • CNC-machined 6061-T6 aluminium plate ensures durability
  • 360-degree swivel with ±35° tilt and roll
  • All hardware and instructions included for quick setup
  • Positions projector approximately 4 inches from ceiling

Mount Compatibility

This ceiling mount is built specifically for ViewSonic PJD5353LS, PJD5553LWS, PJD6552LW and PJD6552LWS projectors. The CNC machined 6061-T6 aluminium plate ensures a precise fit using the projector's own mounting points. It is not a universal bracket and will not fit other models. Installers who need a bracket for a different projector should look elsewhere.

Adjustment Range and Clearance

The mount provides 360 degree rotation plus pitch and roll adjustment up to 35 degrees in any direction. This range allows precise image alignment without moving the ceiling anchor. The design holds the projector roughly 4 inches below the ceiling surface, leaving space for heat to escape. It is not intended for drop or false ceiling installations.

Included Hardware and Installation

All screws, anchors and fasteners needed for drywall or wooden beam mounting are supplied in the box. Detailed instructions walk through the process for a quick setup. The actual mounting plate may look different from product images but will match the listed projectors. The projector itself is not included.

Highlights

  • Precise fit for listed ViewSonic models
  • CNC-machined 6061-T6 aluminium plate ensures durability
  • 360-degree swivel with ±35° tilt and roll
  • All hardware and instructions included for quick setup
  • Positions projector approximately 4 inches from ceiling

Specifications

TypeProjector Mounts

Questions about this item

How do I attach the CNC-machined 6061-T6 aluminium plate to my ViewSonic PJD6552LW and what is the step installers often miss?

Bolt the model-specific plate to the projector’s four threaded holes first, then hang the assembly on the ceiling arm — the step people skip is verifying the plate orientation so the lens cut-out aligns before tightening the 360-degree swivel lock.

What part of this mount will need inspection or replacement after extended ceiling mounting?

The four M4 mounting screws and the swivel tension bolt should be checked annually for loosening caused by projector vibration; the 6061-T6 aluminium plate itself does not fatigue under normal indoor use.

At what tilt angle does the mount reach its mechanical limit during a presentation?

The ball-joint allows ±35 degrees of pitch and roll from level; beyond that the swivel base contacts the ceiling bracket and prevents further adjustment.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.