We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium telescoping projector ceiling mount, 13 to 20 inch extension

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. VIEWSONIC-PJD6550W-LAT-13 Projector Accessory 13-20in Extension

SKU CH-3MF9-6H6F1

Telescoping ceiling mount positions compatible ViewSonic projectors 13 to 20 inches down with 360-degree rotation and 1.5-inch lateral shift

  • TypeProjector Mounts
  • Telescoping extension positions the projector 13 to 20 inches from the ceiling
  • 100 percent aircraft-grade 6061-T6 aluminum construction ensures lasting durability
  • 360-degree rotation with pitch and roll adjustment enables flexible image alignment
  • Lateral shift coupling provides 1-1/2 inches of side-to-side lens centering
  • CNC-machined mounting plate designed exclusively for ViewSonic PJD6550W, PJD6552W, PJD7325, PJD7525W

Telescoping Extension 13-20 Inches

This ceiling mount positions a compatible ViewSonic projector 13 to 20 inches below the ceiling in one-inch increments. The telescoping column is machined from 6061-T6 aircraft-grade aluminum for rigidity. A lateral-shift coupling provides 1-1/2 inches of side-to-side adjustment to centre the lens when the mounting point is off-centre. The unit rotates 360 degrees and allows pitch and roll in any direction.

Replaces Universal Mounts for Listed Models

The plate is CNC-machined to fit only the ViewSonic PJD6550W PJD6552W PJD7325 and PJD7525W models so no universal adapter kit is required. Upgrading from a generic mount is worthwhile when the installer needs precise lens alignment without shims and wants the projector held closer to the ceiling than a fixed drop allows. The design leaves clearance around vents so heat can escape freely.

Build Integration Requirements

The mount attaches directly to a structural ceiling joist or concrete slab; it is not rated for drop or false-ceiling grids. All mounting hardware and detailed instructions are included in the box. Because the plate is model-specific the projector cannot be swapped for a different make or series without purchasing a new plate. The 13-inch minimum drop frees vertical space in rooms with standard ceiling heights.

Highlights

  • Telescoping extension positions the projector 13 to 20 inches from the ceiling
  • 100 percent aircraft-grade 6061-T6 aluminum construction ensures lasting durability
  • 360-degree rotation with pitch and roll adjustment enables flexible image alignment
  • Lateral shift coupling provides 1-1/2 inches of side-to-side lens centering
  • CNC-machined mounting plate designed exclusively for ViewSonic PJD6550W, PJD6552W, PJD7325, PJD7525W

Specifications

TypeProjector Mounts

Questions about this item

What ceiling-to-projector distance does the telescoping extension cover?

The extension adjusts from 13 to 20 inches in one-inch increments, so the projector hangs roughly 13–20 inches below the ceiling.

Which step is often missed when mounting the lateral shift coupling?

After securing the ceiling plate, slide the coupling onto the extension tube and tighten the set screws before attaching the projector plate — otherwise the 1-1/2 inch left/right adjustment will not lock.

When will the CNC-machined 6061-T6 aluminium plate need replacement?

The plate is built to last the life of the mount; replace it only if you switch to a projector model not listed as compatible (PJD6550W, PJD6552W, PJD7325, PJD7525W).

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.