We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling-mount extension tube, 10 inches long, aircraft-grade 6061-T6 construction

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. VIEWSONIC-PJD5155L-MM-10EXT Projector Accessory 10in Extension

SKU CH-QZNB-WA24R

Ceiling mount positions compatible ViewSonic projectors 10 inches from the ceiling with 360-degree rotation and 80-degree tilt, machined from 6061-T6 aircraft aluminium and supplied with all hardware

  • TypeProjector Mounts
  • Sets projector 10 inches from ceiling for optimal placement
  • 360-degree rotation plus ±80° tilt for flexible aiming
  • CNC-machined 6061-T6 aircraft aluminium plate ensures precise fit
  • Model-specific design matches ViewSonic PJD5155L 5255L 5350LS 5550LWS
  • All mounting hardware and instructions included for quick install

Extension Length and Compatibility

This 10-inch extension mount positions compatible ViewSonic projectors approximately 10 inches from the ceiling. It is designed specifically for the PJD5155L, PJD5255L, PJD5350LS and PJD5550LWS models only. The CNC-machined plate ensures precise fitment for these units. Other projector makes or models will not fit this mount.

Adjustment Range and Build

The mount replaces shorter fixed brackets by adding a 10-inch drop with full 360-degree rotation and tilt adjustment up to 80 degrees. The jump is worth it when the projector must clear low obstructions or align with a specific screen height. Aircraft-grade 6061-T6 aluminum construction provides a rigid, lightweight platform that resists vibration.

Ceiling Type and Hardware Check

Verify that the installation surface is a solid drywall ceiling or wooden beam; this mount is not intended for drop or false ceilings. Confirm your projector model matches the listed part numbers exactly before ordering. All necessary mounting hardware and detailed instructions are included for the supported ceiling types.

Highlights

  • Sets projector 10 inches from ceiling for optimal placement
  • 360-degree rotation plus ±80° tilt for flexible aiming
  • CNC-machined 6061-T6 aircraft aluminium plate ensures precise fit
  • Model-specific design matches ViewSonic PJD5155L 5255L 5350LS 5550LWS
  • All mounting hardware and instructions included for quick install

Specifications

TypeProjector Mounts

Questions about this item

What ceiling height does the 10‑inch extension suit?

The extension positions the projector roughly 10 inches from the ceiling on drywall or wooden beams; it is not designed for drop or false ceilings.

Which step in the 360‑degree rotation setup is most often missed?

After mounting the CNC‑machined 6061‑T6 plate to the projector, the installer must tighten the tilt lock at the desired angle within the ±80‑degree range before finalising the roll position.

When should the aluminium mounting plate be inspected or replaced?

Check the 6061‑T6 aircraft‑grade plate and included hardware periodically for corrosion or loosening, especially in humid environments, and replace any corroded fasteners.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.