We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium projector ceiling mount with telescoping pole extending 13 to 20 inches

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. VIEWSONIC-PJD5123-LAT-13 13-20 in projector accessory

SKU CH-ZD3M-427YH

Ceiling mount for ViewSonic PJD5123, PJD5133, PJD5223, PJD5233 and PJD5353 projectors with 13-20 inch telescoping extension, 360-degree rotation and aircraft-grade aluminium construction

  • TypeProjector Mounts
  • Telescoping extension positions the projector 13 to 20 inches from the ceiling
  • 360-degree rotation plus pitch and roll adjustment for precise image alignment
  • 5-inch lateral shift coupling centres the lens when the mount is off-centre
  • CNC-machined 6061-T6 aircraft aluminium plate fits ViewSonic 5123 5133 5223 5233 5353 models only
  • All mounting hardware and detailed instructions included for quick installation

Compatible Projector Models

This ceiling mount is designed for ViewSonic projectors PJD5123, PJD5133, PJD5223, PJD5233 and PJD5353. It uses a CNC-machined mounting plate made from 6061-T6 aircraft-grade aluminium for a precise fit. The package includes all necessary hardware and detailed instructions for quick installation.

Installation Constraints

The telescoping extension positions the projector 13 to 20 inches from the ceiling in one-inch increments. A lateral shift coupling provides 1-1/2 inches of horizontal adjustment to centre the lens when the mounting surface is off-centre. The mount rotates 360 degrees and allows pitch and roll in any direction, but is not intended for drop or false ceilings.

Critical Fit Specification

The mounting plate is manufactured exclusively for the five ViewSonic models listed above and will not fit any other projector. Buyers with a different make or model must select a different mount, as the plate dimensions and hole patterns are unique to these units.

Highlights

  • Telescoping extension positions the projector 13 to 20 inches from the ceiling
  • 360-degree rotation plus pitch and roll adjustment for precise image alignment
  • 5-inch lateral shift coupling centres the lens when the mount is off-centre
  • CNC-machined 6061-T6 aircraft aluminium plate fits ViewSonic 5123 5133 5223 5233 5353 models only
  • All mounting hardware and detailed instructions included for quick installation

Specifications

TypeProjector Mounts

Questions about this item

How do I install the VIEWSONIC-PJD5123-LAT-13 mount and which step is most often done incorrectly?

Attach the CNC-machined 6061-T6 aluminium plate to the projector using the included hardware, then secure the telescoping column to a structural ceiling joist — not drywall — and set the extension between 13 and 20 inches in 1-inch increments; the step most often missed is verifying the joist can carry the load before drilling.

What maintenance or replacement will the mount need over time?

The aircraft-grade aluminium construction and included hardware are designed for the life of the installation; periodically check that all bolts remain tight and that the 360-degree rotation and pitch mechanisms move freely, but no scheduled part replacements are required.

What is the first limitation that appears during sustained use of the mount?

The telescoping extension stops at 20 inches, so rooms needing a greater drop distance will hit that limit first; the mount is also not rated for drop or false ceilings, which restricts where it can be installed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.